• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Blinker issue 66 bronco

mattyq17

Bronco Guru
Joined
Jul 11, 2007
Messages
1,600
Blinkers were working fine then stopped so I have been chasing wires. Found a loose connection and all was good. Now when I turn on the blinker I get one click (can’t tell if it’s the flasher kinda sounds like it is coming from the headlight switch area which is not by the flasher) and then nothing no blinkers. Does this sound like a ground issue or bad headlight switch issue? Checked 3 other flashers and it does the same thing. Stock wiring hacked up by PO’s and some wires added by me. Flaming river column. Thanks.
 

AC932

Full Member
Joined
Sep 17, 2018
Messages
254
I had this problem, turns out my fuse went bad. Had about 10 ohms resistance over it, which was enough to make the blinker flash once and stop.

Easiest way to test that would be to bypass/short the fuse with a jumper wire and see if the signals work.

I don't know that the headlight switch can affect the signals, but I've been wrong before.
 
OP
OP
mattyq17

mattyq17

Bronco Guru
Joined
Jul 11, 2007
Messages
1,600
I had this problem, turns out my fuse went bad. Had about 10 ohms resistance over it, which was enough to make the blinker flash once and stop.

Easiest way to test that would be to bypass/short the fuse with a jumper wire and see if the signals work.

I don't know that the headlight switch can affect the signals, but I've been wrong before.

Thanks very well the click could have been from the fuse block area as it was in that direction from where I was sitting. I have cleaned the fuse box contacts and put new fuses in, same situation.
 
Top