agirgen
New Member
I was doing a little brake work and found that I'm not getting any pressure to the rear brakes. After I bleed the front lines, I moved to the rear but couldn't get any fluid to come out and the brake pedal felt nice as stiff... I started disconnecting lines to see if I could get the pedal to give and fluid to come out... I started with the passenger rear at the drum, no change. Drivers rear from the banjo fitting, no change. Skipped up to the line at the master cylinder, disconnected it and no fluid would come out and the pedal felt stiff as ever. I'm guessing that my master cylinder isn't working properly... Question is, what should I check (if there is anything to check) and is it possible to repair a jacked up master cylinder?
Thanks in advance!
A
Thanks in advance!
A