• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bronco Suprises

Case

Sr. Member
Joined
Dec 7, 2003
Messages
855
How many of you have been working on your bronco and found a nice suprise from the previous owner and no Im not talking about that old french fry you found under the seat. Im talking about speaker wiring, with home wire nuts to wire up some guages. My personal favorite which i found out today was the privious owner of my 72 decided to patch a rusty spot it the drivers floor. It would have been nice except he forgot to allow access to the body mount bolt so i had to chisel the patch out which was fun. So if you have found the same type of things done to your bronco list them so we can all get a laugh.
 

ky-resto

Sr. Member
Joined
Feb 3, 2002
Messages
700
Bought one with 302 featuring a beautiful set of Mickey Thompson aluminum valve covers. Had an oil leak, so I removed them to replace the gaskets. Some kindly gent had drawn the valve cover nuts down to tight and broken off both rear retaining nut flanges- but was thoughtful enough to piece them back together with a little silicone on the inside so you couldn't tell.
 

Dez

Full Member
Joined
May 15, 2003
Messages
325
The PO of my first Bronco had glued a piece of 1/8" plywood in the back to flatten out the bed and then glued the carpet over that. That did a wonderful job of trapping moisture between the plywood and the tub. Luckily I wanted to put a rear seat in there and found it before the bed was completely rusted through.
 

MountainGuy

Sr. Member
Joined
Sep 22, 2002
Messages
609
Loc.
Athens, Georgia
PUlled up the old vinyl floor and found Duct Tape everywhere. Aparently someone is taking the " Duct tape will fix anything" attitude too far; it doesn't get rid of rust or stop spread. The fun part was getting up off the floor after it had melted itself to the metal.
 

67halfcab

Bronco Guru
Joined
Mar 30, 2002
Messages
1,642
Loc.
Michigan
My favorite PO upgrade was the road sign floors covered by Tin then the rubber floor mat.

Worst part was the road sign wasn't one piece but actually three.;D
 

72Sport

Bronco Guru
Joined
Jul 8, 2002
Messages
2,954
My PO had towing mirrors on both doors. I noticed that they seemed to be a little loose. I tried to tighten the screws. Much to my surprise they were mounted with lead anchors, the ones that are usually used in concrete.

He was also a trailer hitch expert. He made a hitch out of 5/8" x 24" x12" plate and mounted to the bottom of the stock bumper with the two stock bolts through the frame ears.
 

SACHEM

Back From the Dead
Joined
Nov 29, 2001
Messages
2,458
My bronco had a circular hole cut in the hood and about 3 egr plates stacked up and blocked off to raise the half of the carb and the whole air cleaner abouve the hood.

The best was that my pitman arm had been cleanly cut in two and had angle iron and booger weld added to make a drop pitman arm. It got replaced real quick.

I also have a minnow in the washer tank. I left the minnow in the tank when I sold it on ebay. He was perfectly preserved.

I'd really like to shoot the previous owners of my Bronco and myself for not taking any true before pictures.:mad:
 

bronco977

Full Member
Joined
Feb 15, 2003
Messages
188
Loc.
Bakersfield
When I bought my first Bronco, it had been sitting for 7 years, and had been filled with trash. The top was off, and a Chinese Elm tree had grown up where the rear seat shoulda been.

A couple of years later, while I was changing a leaky heater core, I found a ladies wedding ring inside the heater housing. Got $200 for it at the pawn shop!
 

MnkyBiz

Bronco Guru
Joined
Jan 17, 2004
Messages
3,758
Loc.
Northern VA/DC
My PO was a border patrol officer, and apparently also liked his music. All the wiring was left in the rig from the patrol lites, including the really nice jumpers into the old fuse panel. Also, he left all the wires from the battery to the amplifier, and then on to the speakers.

He didn't cap anything off, though. When I finally got her shipped from Montana to VA, and tried to start her, it was amazing the amount of sparks I got all over the inside of the vehicle!!
 

73 bronc

BANNED
Joined
Sep 17, 2003
Messages
221
On my 76, the PO had put 1/4 inch plywood over all ov the hardtop windows, and was sleeping in it i guess. After I got it all removed, I heard something rattling up by the wiper cover. It was a gram of Cocaine! I pitched it out the window, and hauled ass.
 

TJK74

Bronco Guru
Joined
Feb 21, 2003
Messages
3,154
Loc.
Newark CA
Nice surprise

Pulled up the carpeting from the front and just behind the tunnel cover under the carpeting was the factory build sheet. Nice surprise. Listed engine size, gear ratios, transmission, transfercase, paint color, carpet and trim package, etc.
 

Henrietta

Jr. Member
Joined
Jul 24, 2003
Messages
147
Loc.
Bradyville, TN
Numerous surprises

Have had mine for about a year...Still finding little surprises. Almost all the wiring for the trailer harness was spliced in using wire nuts. I ran out of butt splices after replacing about 50! Also the floor pans had been covered with some fiberglass, then sheetmetal. All anchored to the floor with drywall screws. When I got up under and looked at the pans, there is nothing there...The flat part of the original floor pans are gone and only the angle behind the pedals is left....
Off subject, but when I wanted to put tile in my laundry room I felt a soft spot in front of the washer. After ripping up the first 3 layers of linoleum, and 1/2" plywood, then I found a PALLET under the washer, two more layers of particle board, and some asbestos tile...Finally found the original oak plank subfloor. No wonder the floor was 2" higher than the rest of the house!
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
mine has (as of right now) 1"x4" s screwed to the backside of the door posts to help hold the doors up i guess, and plywood under the carpet in the front floors. I guess gives a new meaning to floorboards.;D
 

Henrietta

Jr. Member
Joined
Jul 24, 2003
Messages
147
Loc.
Bradyville, TN
Forgot one

Forgot to mention the drivers side window track was broken and held on by a piece of jb weld...Now the track falls down in the way...time for some new pieces!
 

joules

Jr. Member
Joined
Apr 15, 2002
Messages
121
Loc.
Marysville, Wa
A nice burly hitch that he welded together and bolted to the frame. The problem was the brace part ran up behind the pumpkin and up to the frame. It only had about a 16th clearance. So everytime i jumped on the gas, the rear end squatted a bit, axle moved back, contacted the hitch and transmitted a gawdawful vibration up through the frame. I about SH&T myself the first time it happened. Not to mention the nice groove i now have in my housing...
J~
 

63130dp

Jr. Member
Joined
Sep 8, 2003
Messages
84
Loc.
st. louis missoura
I posted this before but here it is again.
PO put a screw directly thru the wire harness.. was driving it for 6 months before the wires finally started a fire.
fried_wires.jpg
 

agent_orange_71

Sr. Member
Joined
Dec 30, 2001
Messages
831
Loc.
Bluefield, WV
I parted out a 74 that the rear spring hangers had rusted out, and the owner wedged 2x4 (wood) blocks between the spring eyes and the floor. In other words, 2 bolts were holding the entire rear axle in

on my 71 which I am rebuilding, both doorposts were rusted to crap. The screw heads were rusted/broken off I guess, so the PO BRAZED the fenders to the doorposts and then bondo-ed over the whole thing. As you might imagine it was rather interesting getting the front fenders off.
 

R3

Jr. Member
Joined
Oct 7, 2002
Messages
116
Loc.
VA
I had a '76 that had vinyl siding and expanding spray foam insulation to patch floor and bed. Also the driver door, doorpost and fender were held on by a chain around the brake booster bracket and a piece of coat hanger around the e brake pedal. The list went on and on
 
Top