• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Calling all ‘66 experts…1966 Heater delete help

MyOriginal66

Bronco Guru
Joined
Aug 11, 2009
Messages
2,073
On the heater delete broncos I remember seeing a sheet metal block off plate on the passenger side where the air box enters the cabin. I’ve also seen a restored U13 where the hole wasn’t there at all but it could have been filled during restoration. Anyone have information or a pic of this?
 

Attachments

  • IMG_8075.jpeg
    IMG_8075.jpeg
    179.9 KB · Views: 72
OP
OP
MyOriginal66

MyOriginal66

Bronco Guru
Joined
Aug 11, 2009
Messages
2,073
Thankfully Nick sells the block off plates. NorthEast Classic Bronco parts. There’s still some question though wether they used all 6 holes or just 3 from the factory? Nick’s has 3 holes but I’ve found a pic of 6 screws.
 

Attachments

  • IMG_0675.png
    IMG_0675.png
    1 MB · Views: 76

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,415
Loc.
NW OK
Wish I had a definitive answer for you but I've never seen one without a heater that had the passenger fender pulled off.
 

Double66

Contributor
Jr. Member
Joined
Mar 18, 2017
Messages
213
My August 65 build has 3 holes and had a plate on the inside.
 

Attachments

  • 20230603_093902.jpg
    20230603_093902.jpg
    192.3 KB · Views: 58
Top