• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

CRAZY AWD idea...

brewchief

Sr. Member
Joined
Feb 11, 2007
Messages
877
If running GM trans(and possibly motor) I might look at what GM used in the cyclone and typhoon trucks that they built for a short time, I think the same case may have ended up in the Olds bravada as well. Output might be wrong side but a custom front axle could be built.

If you build an AWD bronco pay close attention to the front driveline angles, it's going to have to be perfect or it's going to vibrate.

No way I would swap in a BB chevy motor, if I had to run a GM motor in an early bronco it would be a very healthy LS motor, probably supercharged.
 

Ranchtruck

Sr. Member
Joined
Feb 7, 2008
Messages
768
True, the AWD case out of an Astro/Safari van would be a good match to the 700r4.

I don't see a 700r4 lasting long behind a big block unless you drive like a wimp. Which kind of defeats the point of having a big block? I also don't see the point of a big block in a bronco, there's not that much weight to get moving off the line where you'd need the torque of a bb and a turbo on a small block will give you all the horsepower you could ever want.
 
Top