Dana 20 j shift front output assembly question?

[langester]

I am in the middle of rebuilding my j shift t case. I am reassembling the front output shaft and all the breakdowns show a spacer between the front drive high gear and the bearing. When I tore mine down it did not have that spacer. There is one between the yoke and the bearing but that is the only one.
Am I missing parts here or does the j shift not have one?

Thanks in advance!

 

[langester]

Okay, I am an idiot! I went back and checked all my parts and the spacer was stuck to the old bearing. Sorry for wasting space on the forum! Brain cells are at a minimum at my house today!
Have a good one!

 

[Viperwolf1]

Don't lose it. Nobody makes them.

 

[langester]

I thought I had lost it. The old oil had it stuck pretty hard to the back of the bearing. It didn't even look like it was a separate part. Glad I didn't throw anything away!

 

[gnpenning]

Learned to keep everything until I have enough miles to know everything is good. Some of these new parts are a step in the wrong direction....

 

[langester]

I hear ya on that one. Quality is not a requirement for a lot of things you get now a days. Minimum at a Premium!