• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Drive-line angle and phasing

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
Except that's not the setup used in our EBs..where the phasing is cancelled in the double-cardan section and the u-joint on the other end has little/no angle.

That video always confuses new Bronco owners who don't understand why the rear dif yoke points skyward like it does. ;-)
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Except we are running CV joints at the transfer case, which is already self canceling.
 
OP
OP
AZ73

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Well I learned something newer! Sorry for the mis-info!
 
Top