• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

EFI- Pro Flo or Sniper etc.

STalon89

Full Member
Joined
Oct 15, 2016
Messages
311
Looking to get things in order for a winter project and Im unsure which route to go for efi. The truck is very original and still running all the factory stuff. Fuel tank, air filter, carb etc. What system do you guys like?
 

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
I like the fact that the pro flow has a fuel rail and injectors and comes with a distributor made to work with it, but I would like to hear some reviews also.

I feel there are more Sniper EFI on here.
 

Remos69

Contributor
Sr. Member
Joined
Oct 23, 2017
Messages
710
Loc.
SW Florida
I have a 2yo FiTech, the reason I went that way was a frame off, restomod restoration. All new everything except parts of the tub as it was in very rough shape. Honestly though if all is working.....if it ain't broke, don't fix it!
 

76YETI

Contributor
Sr. Member
Joined
May 27, 2015
Messages
932
Loc.
KC METRO
I've debated this for the last couple years. The research/reviews I found ranked FiTech as the least favorite. Sniper was better basically due to the accessories, etc. Both apparently suffer from heat soak in the engine compartment which leads to problems. ProFlo4 is rated the best, but like Remos69 said, if it ain't broke don't fix it :)

comparison:
 

MonsterBIlly

Sr. Member
Joined
Dec 17, 2015
Messages
461
I live in AZ. I had the Fitech on my 75 Bronco and I found it to be nothing but problems. I had to send it in for warranty twice forbthe couter failing.
I scrapped it and put on a Sniper. Sniper has been pretty good but it does have tuning problems. It bounces around and cant seem to keeo a smooth tune.

I have the Atomic EFI on my 66 mustang and it has been perfect.

If ibhad it to do allnover again, i would have stuck with a carb. Throw a 600 cfm truck avenger in it and be done. FI sucks.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Out of those 2 choices- ProFlo4.
 

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
Had nothing but problems with Fitech. Finally found a guy who was able to tune it. Runs well now but I'd never do it again or recommend it to anyone. Same guy says Sniper much easier to tune if you know how.


Sent from my iPhone using Tapatalk Pro
 

BUCKWILD

Sr. Member
Joined
Jun 20, 2016
Messages
355
Loc.
Butte county
pro flo 4 all the way but can present hood clearance problems I have on feeding a 600hp 408 and cant be happier, better than oem. friend has on on a basicaly stock 302 mustang and loves it( had a fitec) and would never run right
 

BGBronco

Contributor
N A S H V I L L E
Joined
Jun 23, 2017
Messages
1,622
Loc.
Tennessee
I have Fitech. I went through some issues but in fairness to FiTech, many of my issues were specific to my installer (Me). There is a lot of Fitech info out there but it is unorganized and hard to filter through.
 

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
The Ford FI is excellent. It's just a different look.


Sent from my iPhone using Tapatalk Pro
 

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
I run the Ford fuel injection, but I agree it's ugly.

I wish I woulda went edelbrock pro flow so I could run a traditional hot rod looking air fitler.
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
I have installed a hand full of Sniper EFI systems now. I have had great results with it so far.

Install a cable, and progressive throttle linkage and a 1/4" phenolic spacer to help prevent heat soak. You have to reprogram for the progressive linkage, no worries because the Sniper has the option built into initial programming.

Looks more original, kinda hidden under Air cleaner. Runs Vey well with this set-up. Add the Hyperspark ignition for a true plug and play.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I probably would have gone with the Sniper, but I was building a complete motor and needed to buy a manifold and distributor anyway, so the ProFlo 4 was just more cost effective.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Well, the OP asked about Sniper or ProFlo, not Ford EFI.

Get on the Sniper & ProFlo forum boards and let the results of reading those decide for you.
 
Last edited:

CowboyGrin

Contributor
the circus looks like fun
Joined
Jan 20, 2021
Messages
175
Loc.
Oklahoma
I probably would have gone with the Sniper, but I was building a complete motor and needed to buy a manifold and distributor anyway, so the ProFlo 4 was just more cost effective.

Any complications with the ProFlo 4 on the initial startup of your motor? I'm comfortable with initial startup with a carb, but throwing in complications of a new system with no prior experience using it makes me pucker a bit, especially on a higher-end engine build. Really do like the ProFlo 4 tho, makes me want to take the risk.
 

T-7ToNewOldB

Full Member
Joined
Dec 7, 2018
Messages
315
I have profilo 4 and love it. Can't compare since I never used the other two. I know that TBI like Sniper and FiTech can have issues with some intakes. Obviously proflio the whole system is integrated. Also, have to assume there are pretty good reasons that OEMs focussed development of fuel injection at each cylinder, I'm sure they understood that TBIs were cheaper to make.

However, sniper works well (friend has it on similar engine). Cheaper and easier to install. Both major plus over carbs. IF all new I'd never get Sniper or FiTech. However, a lot of people want to use the existing intake and keep it as simple and cheap as possible. Nothing wrong with that.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
I feel the Pro-flow 4 is a better aftermarket EFI, but it comes at a higher price point.

The Sniper offers offers a more stock appearing package, and more intake options.

What is your goal and budget?
 
Top