• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Eliminating fuel switch

White Knight

Contributor
Sr. Member
Joined
May 31, 2005
Messages
566
If I’m running just one fuel tank is there any reason why I wouldn’t eliminate the fuel switch? I plan to leave in the event there is a need to run 2 tanks again or for originality.
 

gnsteam

Contributor
Bronco Guru
Joined
Jan 29, 2010
Messages
4,148
Loc.
Lincoln NE
I kept mind. Because I forgot to have the body shop fill the hole. So I may re-purpose it for something. Maybe like Yeller's suggested.
 

JoePro

Contributor
Sr. Member
Joined
Mar 4, 2013
Messages
351
I left the switch for originality. My kill switch is the auxiliary gas cap. But right now it’s disabled while the shop was chasing a few other issues
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
The bypass is as easy as flipping a couple of wires too.
The factory used the same harness for one, or two tank model Broncos. So the wiring is already "1-tank ready" as it sits.
It is a stock original wiring harness?
If so, look under the dash behind the switch for the Orange wire with an unusual 90 degree connector. Pull apart, and re-connect the side from the gauge, to the side to the tank, and you are no longer including the switch in the circuit,

It's been a long time since I had to do one, but I did it every time a switch went out on me or an acquaintance.
It was easy to figure out in person.

Paul
 
Top