• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

explorer engine w/3speed trans trouble

Rocko1012

Full Member
Joined
Nov 20, 2016
Messages
225
Used flywheel and clutch assembly from 88 F150 Standard trans (Oreillys parts) Put trans and engine together twice. Could not turn engine once matted together.
Pull back apart to find Clutch disc housing is binding on bellhousing when fully together. Advice. Clutch assembly came with a help line phone number. I call and it was discussed I would have to grind down bellhousing to make clutch work. I did some grinding on area that is in pictures attached. See pictures
Anyone experience this.
3 Speed Ford stock trans and bellhousing.
Explorer engine.
 

Attachments

  • InkedIMG_0019_LI.jpg
    InkedIMG_0019_LI.jpg
    68.1 KB · Views: 115
  • InkedIMG_0018_LI.jpg
    InkedIMG_0018_LI.jpg
    107.1 KB · Views: 119

Crush

Contributor
Bronco Guru
Joined
May 30, 2007
Messages
3,463
Loc.
Greenbottom, WV
Yep that is common when using the diaphragm pressure plate intead of the three finger type. When you order one from a bronco vendor it comes with those specific instructions
 

Redbark

Full Member
Joined
Sep 5, 2016
Messages
186
I hope this isn't a thread hijack. I'm curious what flywheel you are running? There are many 50oz imbalance flywheels available (mustang, F150, later Bronco) that will work with the roller 5.0.

Other than 164 teeth on the ring gear, is there a specific 50oz flywheel to use is an early Bronco with an explorer 5.0 conversion?

I ask because I'm considering running an explorer 5.0 with an AX15 5 speed. I all ready have the AX15 trans and adapter plate for the stock Bronco bellhousing.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,649
Generally most people use the full-size truck/Bronco flywheel from a 5.0 in the mid '90's. That's the style we sell.
You can't use the 351/5.8 version because it's still 28oz, but the 5.0 seems to be the same as our early ones, with proper offsets and such.

Paul
 

gick70

Sr. Member
Joined
Jan 30, 2011
Messages
567
Yes,had this happen to me !! I cleared out the bell housing !!
 
OP
OP
R

Rocko1012

Full Member
Joined
Nov 20, 2016
Messages
225
getting closer to having enough of the bellhousing ground down. Its not a flywheel issue, its the type of clutch design
 
Top