Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
On my 67 how do I go about removing the front brake drum. Looks like on later model;s you remove the spindle nuts and bearings. Is it the same for 67???
It's kind of a good way to go anyway. While checking/replacing the brakes you can also check, re-pack and readjust the wheel bearings as well.
A good practice since wheel bearings were to be re-packed probably every 25k to 45k miles anyway.
And with the number of PO's that did not know how to adjust them properly, it's always good to check their work if it's a newer purchase.
It's kind of a good way to go anyway. While checking/replacing the brakes you can also check, re-pack and readjust the wheel bearings as well.
A good practice since wheel bearings were to be re-packed probably every 25k to 45k miles anyway.
And with the number of PO's that did not know how to adjust them properly, it's always good to check their work if it's a newer purchase.
Absolutely. They are some of the most common tapered bearings ever sold and are common to most Dana axles of similar vintage prior to the use of unit-bearings.
Should be no problem finding them in stock still at most parts stores.
I was scratching my empty head as to where are the slave cylinders. Wheel cylinders , ah got it. Disc brakes, yea some one has front wheel to wheel disc setup on marketplace for 750, OBO May look into that for later
I always brace myself for an explanation to the counter person at the parts store as to what it is I'm looking for anyway, but my closest auto parts place is an Autozone.
How to remove drum. Take hammer and pound out.studs and when studs are out take each stud and go to grinder and remove swedges on studs.when done drum will come off easily.next remove hub off spindle and pound or press studs then reinstall everything will come off easy.