Front bump stop with Trac-bar riser

[bronconut73]

Easy solution to the issue where our tall bump stops won't fit after the Trac-bar riser install.

Found these web surfing.

You can find them everywhere, Amazon, Ebay, etc...

But Summit had the pair for only $30.95.

Room for a few washers on the stud to make it even taller. I added two fat washers.
Also a tab that I needed to grind down a bit.

They look like leaf spring ie rear bump stops for a big truck.
91mm or 3.6" tall.

 

[bronconut73]

Pretty high durometer "rubber".

Not as good or progressive as our typical poly bump stops but it was an easy fix that I wanted to experiment
with. I will re-post with my findings if I can ever get this thing to hit its bump stops, lol.

 

[Viperwolf1]

Those look like rear bump stops from a silverado.

 

[bronconut73]

The Silverado and Dodge ones I saw are a real light color. I saw those. This one is a little taller/longer.

 

[Viperwolf1]

The Silverado and Dodge ones I saw are a real light color. I saw those. This one is a little taller/longer.

The z71 ones must be longer and blacker.

 

[bronconut73]

That WH riser may be a little taller than my Duff one too.
Otherwise it looks like mine.

I found it on line then lost it for a few days. Thought I remember it being a rear bump stop so I checked the "Big Three" on line but was not finding 3.6" tall versions of what I had found....kept looking then remembered I found them at Summitt.
I am pleased with them but I am always second guessing myself, so it was nice to see your photo, lol.

 

[bronconut73]

Update,

Tried running it hard on some whoops and articulated it real hard, still can't make that new bump stop touch.
I used to really worry that my Duff riser bracket would hit the frame on a big bump. I tried really hard and could not even make that extra tall bump stop even lightly touch the frame.