• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fuel injection problem?

OP
OP
BRONCITIS74

BRONCITIS74

Full Member
Joined
Oct 4, 2015
Messages
340
Here are the pictures of the motor. The fuel pump is mounted on the frame right behind the switching valve for the tanks. I know it needs to be moved to within 2 ft. of the tank. I also know it should be about the same level as the bottom of the tank.
 

Attachments

  • 20230704_153754 (1).jpg
    20230704_153754 (1).jpg
    255.2 KB · Views: 124
  • 20230704_153817.jpg
    20230704_153817.jpg
    227.4 KB · Views: 109
  • 20230704_153839 (1).jpg
    20230704_153839 (1).jpg
    274.7 KB · Views: 132
  • 20230704_153910 (1).jpg
    20230704_153910 (1).jpg
    264.2 KB · Views: 130

lars

Contributor
Been here awhile
Joined
Jun 29, 2001
Messages
3,334
Loc.
NorCal flatlands
Yup, speed-density. Looks like the TFI module lives in the bracket adjacent to the ignition coil. My money is on it failing. Your symptoms are classic for a TFI module heat-related failure- a reason many of us switched to distributorless ignition years ago. Easy swap and not terribly expensive. Yes, it could be the fuel pump location, but that's a 'depends on the fuel pump.' Every pump I've had, feeding from two tanks and frame mounted similar to what you describe, have never hiccuped in 25 years of service.
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
2,760
Loc.
CA
Yup, speed-density. Looks like the TFI module lives in the bracket adjacent to the ignition coil. My money is on it failing. Your symptoms are classic for a TFI module heat-related failure- a reason many of us switched to distributorless ignition years ago. Easy swap and not terribly expensive. Yes, it could be the fuel pump location, but that's a 'depends on the fuel pump.' Every pump I've had, feeding from two tanks and frame mounted similar to what you describe, have never hiccuped in 25 years of service.
Yeah, @lars , it's cheap unless I do it my way (MS3 PiMPxs, COP, IGN1A coils..., I definitely went too far, I have a problem, but I at least know it). Edit...also forgot my custom cam sync. That wasn't an expensive nor time consuming tackle at all.

I second (or 15th) replacing the TFI module. Not expensive and most likely culprit.

I also second (or more) your engine running WAY too cool. These engine are supposed to run with a 195° thermostat. (or maybe 192°.
 
Last edited:

rocknhorse76

Contributor
Bronco owner since 1993 💪🏻
Joined
Jun 7, 2014
Messages
463
Loc.
Central WA
Yup, speed-density. Looks like the TFI module lives in the bracket adjacent to the ignition coil. My money is on it failing. Your symptoms are classic for a TFI module heat-related failure- a reason many of us switched to distributorless ignition years ago. Easy swap and not terribly expensive. Yes, it could be the fuel pump location, but that's a 'depends on the fuel pump.' Every pump I've had, feeding from two tanks and frame mounted similar to what you describe, have never hiccuped in 25 years of service.
Yep, my only regret about EDIS is that I didn’t do it sooner. I always carried spare TFI modules since they would go out so often!
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
Looks to me the TFI is in a heat sync just like my 96 donor van was. Extend the wiring and move it to the side of the engine bay. Also they can be tested at local big box auto stores.

Move it and replace it. Give it a drive and fingers crossed your good to go.

Tim
 
OP
OP
BRONCITIS74

BRONCITIS74

Full Member
Joined
Oct 4, 2015
Messages
340
OK, guys. Just got the Bronco out of the shop. They replaced the TFI module, moved my fuel pump to within 2 ft of the gas tank, replaced the thermostat with a 195 unit, put new gaskets on the valve covers and intake, and found and fixed several vacuum leaks near the fuel injection. I drove it home, let it sit and idle till the temp reached 200, then tried to drive it. It sputtered and killed. On the 3rd try it finally started. I am about to give up and put it up for sale. Do you guys have any more ideas? Btw, they checked my fuel line to be sure it wasn't resting on or near the engine.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
OK, guys. Just got the Bronco out of the shop. They replaced the TFI module, moved my fuel pump to within 2 ft of the gas tank, replaced the thermostat with a 195 unit, put new gaskets on the valve covers and intake, and found and fixed several vacuum leaks near the fuel injection. I drove it home, let it sit and idle till the temp reached 200, then tried to drive it. It sputtered and killed. On the 3rd try it finally started. I am about to give up and put it up for sale. Do you guys have any more ideas? Btw, they checked my fuel line to be sure it wasn't resting on or near the engine.
At least your temps are finally good. Should operate between 195-210 in my experience. I have all the OBD connectors and diagnostic software ona a laptop, so I'm "spoiled" when it comes to troubleshooting this kind of thing. I'd be lost without it....
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
2,760
Loc.
CA
And the shop did all this stuff but didn’t actually figure out what the problem is and gave it back to you? What assurance do you have that they even did this work correctly? And was it a Ford TFI module or aftermarket?

And yeah, do you have a code reader to see if any codes thrown?
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Do you have a fuel pressure gauge you can hook to the fuel rail port for testing? When it is running poorly or hard to re-start check the gauge and see what you have. If you have fuel problem like overheated pump, fuel line near a heat source, heat soak into the injectors etc it will all show up as low fuel pressure. I just put a hand held gauge on there and wire it down for testing then when it runs bad I pop open the end to see.

I hate to see you spend more money on this but I have 90s era Mustang and 00 era Explorer EDIS and it runs very reliably.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
What type EFI? T-body or Ford or other?

Your engine temps are actually to cool. EFI likes heat. 210ish is where most EFI's run the best.

Tim
You need a 190 thermostat first off, let the computer see what it's designed for, 190, then it goes full closed loop tune. That is probably not your issue, but you do need a 190. If it gets hot, then chase the cooling system issue.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782

Sendero

Contributor
Sr. Jr. Member
Joined
May 12, 2022
Messages
114
Ditto on the fuel pump being the suspected issue in my opinion. I know you said it was replaced but was it replaced after this problem surfaced in an effort to fix the problem or was it replaced somewhat recently and now you have this problem? Aftermarket in-line pumps aren't always the best and in tank pumps are usually better because the fuel in the tank helps keep them cool. It is not uncommon that brand new electronic parts are faulty and I would also make sure it is sized correctly. I had a foxbody with an inline pump that was doing something similar until I replaced it. It only happened to me in the summer when it was hot outside. I like what @pcf_mark said about installing a pressure gauge you can look at. The redneck version would be to depress the schrader valve on the fuel rail after it dies to see if there is any pressure left in the system but that may not tell all. Good luck, don't sell!
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Next time it runs rough and dies or nearly dies shut down. Turn key on but do not start. Do on/off/on a few times this will run the fuel pump a few times and purge any air and force fuel to the injectors. If it runs good after doing this then you know it is your fuel system is the problem.
 
Top