• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fuel Problem

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
I agree that although not original, a filter before the pump is a good idea and not your problem unless it's stopped up with crap.
 

Unaweep

Full Member
Joined
Sep 11, 2013
Messages
215
Loc.
Grand Junction CO
I run a filter between each tank and the electric fuel pump. Clear filter to see any debris that may be coming up from each tank.

I also run another filter between the fuel pump and the carb, again another clear filter to see what's going on. (my Bronco sat 10 years before I bought it, so I'm concerned there may be junk in the tank or junk that breaks loose when I start driving it)

J.E.
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
You only need one filter. Two won't make the fuel any cleaner and can increase likelihood for vapor lock because of increased surface area. The best place for the fuel filter is right before the carb and below the float level. The teenie one that came with the car really is too small though. You can replace it with a barbed fitting and put an inline one there. Also, I see that dual exhaust has been added. If the factory fuel line is still there, it's probably too close to the fuel line. Adding shielding and insulation will make it take longer, but vapor lock can still be a problem on a warm day at high elevation. I found it best to move the fuel line outside the frame rail, completely away from engine heat.
 
Top