• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Full width swap donor questions

hoooodini

Jr. Member
Joined
Nov 12, 2009
Messages
74
Loc.
Castle Rock
I’m looking to do a full width axle swap on my 71. I found a 77 F250 with a D44 front and D60 rear. The rear swap is straight forward but I’m not so sure about the front. The 77 has leaf springs on the front and mounts for the shocks outside of leafs. Am I correct in thinking that I can cut off the perches for the leaf springs and the shock mounts and weld on wedges? It looks like the driver side leaf perch is partially integrated into the diff housing. If I remove these, can the wedges be placed in what would be the original location for an early Bronco?

Also, I believe the D44 is a high pinion. Will that fit a 71 with 3.5” SL and 1” BL?
 

70greenhorn

Jr. Member
Joined
Mar 23, 2010
Messages
69
Loc.
Manakin Sabot, VA
I would consider a 3 link if you are going through the effort to cut an re- weld the old wedges. 3 link will give you better flex up front. Dan Wheeler has a good write up about it on here.
If you are considering tires larger than 36" and more serious wheeling, a dana 60 front axle will be much stronger.
I have a D60 front with factory style wedges and radius arms. I'm strongly considering the 3 link and coil overs.
Good luck with your build.
 
OP
OP
H

hoooodini

Jr. Member
Joined
Nov 12, 2009
Messages
74
Loc.
Castle Rock
Thanks for the suggestion. I'm not gonna do any serious wheelin and I prefer to stick with the stock style link. I just finished all the mods on my frame and had it powder coated. I don't mind the welding on the axle but I don't want to buy it until I know it will work. Surely someone has come across this.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Get yourself the Bronco/F150 axles and save yourself a ton of time.

And those "Dodge" style arms look like Jeep 3 link arms...
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
The easy way is, as others have noted, to got with the F-150/Bronco front 44 housing. You can swap the knuckles off that F-250 44 to match the 8-lug D60 in back and also get the larger calipers. That's what is on my '69..see my sig line below.

You can also add wedges to that F-250 housing...
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I would add wedges to the F250 housing if you are set on it - that is easy enough...
 
Top