• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fuse Question

Comemonday71

Jr. Member
Joined
Jun 19, 2019
Messages
138
Hey Gang!

Lost my turn signals (front & rear) and back up lights. I see that I blew a fuse. Pulled fuse out and for the life of me I cannot read what amperage it is. I have a stock wire harness. Do any of you guys know what the correct fuse I should use to replace? Thanks!
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Viperwolf and others have posted up a chart, but you should be able to see by this '68 fuse panel most of the ratings.
Looks like the turn signal is 14a second from the top and the hazards are 20a down at the bottom right.

015 (Large).jpg

Which one did you blow?

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Oh, and now's a great time to just pull them all out, clean the contact points and put them back in. These old glass fuses and panel contacts really can build up corrosion over time and reduce the flow of electrons through the system.

Things always seem to work better after you pull the fuses out and put them back in. And on '70 and older models doing the same thing to the firewall plugs can often help. Though they're sealed, so not as prone to simple corrosion from air exposure, they still have a reputation.

Paul
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Here's the chart.
 

Attachments

  • fuse trade numbers.JPG
    fuse trade numbers.JPG
    37 KB · Views: 132
Top