Just FYI as an option for a replacement module, Pertronix does list two, and possibly three appropriate GM HEI modules for these types of distributors.
Their D2000 is a replacement for a 4-pin module. Their D72000 is actually a replacement capable of multiple sparks, rev limiting duties, and probably a few other bells and whistles too.
If your distributor has one of the 7-pin modules (doubtful, but possible) the D2001 is the replacement for it.
The reason I think it's doubtful that the aftermarket uses the 7-pin units is that I believe (but don't know for a fact) that those were used with electronic timing control computers, or something like that.
Those are their own numbers too though, and don't list the GM equivalent for hunting one down at a local parts store.
But if the local computer has crossovers to Pertronix, they should be able to give you all the usual choices.
I would not cheap out though, even for a spare for the glove box. Or if you do insist on buying an inexpensive replacement, I would install it to make sure it works first. Then keep the old one as your spare.
Too many parts these days are bad right out of the box. Frankly then, it pays to verify that even an expensive one works before it goes in the glove-box!
Paul