• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Help me find out tags

LesterAllen

New Member
Joined
Jan 7, 2023
Messages
1
I received my Marti report and found out that the frame of my vehicle is from a 1969 model, but there are no tags on the tub. I am now trying to determine the year of the tub so that I can purchase the appropriate doors. Any assistance would be greatly appreciated. Thank you.
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
I received my Marti report and found out that the frame of my vehicle is from a 1969 model, but there are no tags on the tub. I am now trying to determine the year of the tub so that I can purchase the appropriate doors. Any assistance would be greatly appreciated. Thank you.
Post inside and outside pics of your tub, as many as possible.
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Do you have striker posts installed on the B pillars? If so, if the striker posts are round you have a 66/67 tub. If the striker posts are oval, you have a 68-77 tub.

If you don't have any striker posts installed, what is the measurement from the top of the rocker panel to the center of the striker post mounting area? That dimension will allow us to determine if you have an earlier or later tub.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
I received my Marti report and found out that the frame of my vehicle is from a 1969 model
What year is it supposed to be? And does the VIN on the title paperwork match the frame?
...but there are no tags on the tub.
The certification label on the driver's latch pillar did not start until about '68, but even then did not have any VIN info until sometime around '70 or '71 maybe? My '71 has it, but my '68 simply has a decal with general info on it. No VIN or date info.
I am now trying to determine the year of the tub so that I can purchase the appropriate doors.
Just what they said. Latch height and design changed in '68(?) and ran consistent from there through '77.

Paul
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Picture of the B-pillar striker is all that is needed to tell you what years of doors will fit that tub.
 
Top