• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

High idle at cold start!

DeepC73

Full Member
Joined
Dec 25, 2020
Messages
224
Alright, it’s time for the newest problem. When I start up my bronco when it’s cold it idles extremely high. I’ve adsjusted the choke and the mixture, but it didn’t help. It’s a new Holley 600, dual plane manifold on a 302. It idles really high, like 2200 rpm’s or higher. It idles high for about 2-3 minutes before it starts to slowly come down, 1-2 more minutes. Any ideas?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Does it come down on its own, or after you tap the throttle and knock it off the fast idle cam.
If it comes down on its own, there is probably a vacuum leak or some other oddity that needs to be found.
If it is 100% just the fast idle cam on the choke that is holding the fast idle, that is a seperate adjustment from the regular idle speed. Been too many years since I owned a Holley carb, but I recall there is an adjustment. And I want to say is isn't the most fun to adjust.
 
OP
OP
DeepC73

DeepC73

Full Member
Joined
Dec 25, 2020
Messages
224
It does not come down on its own. I have already rotated the electric choke housing to lesson the tension on the choke. I just let out on the fast idle screw one turn.
 
OP
OP
DeepC73

DeepC73

Full Member
Joined
Dec 25, 2020
Messages
224
It appears the fast idle solved the problem. I’ll know more tomorrow morning. More to follow.
 
Top