lagbolt
Sr. Member
- Joined
- Jul 18, 2012
- Messages
- 577
I recently replaced my ignition key but not the tumbler because I had a problem with it sticking in the start position. After replacing the switch I’m still having the same problem. When I take the tumbler out of the switch it’s nice and free with no sticky spots. Also noticed I have to move it around a little bit when I’m going from off to the on position but doesn’t do it from off to ACC position. Any one have any ideas on what it could be or just replace the Tumbler? I would prefer not to change the tumbler because it’s the original key. Thanks.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk











