• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Important 1977 Bronco facts

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Do you (or anyone) have a pic of what an "automatic hub" looked like in '77. I was actually in autoparts sales in those days and don't remember an automatic hub amongst the various flavors that we sold then.

Almost 100% of the hubs we did sell over the counter back in those days were for installation to either replace crappy stock selectable hubs or to install selectable hubs where only drive slugs existed (most Dodges, for example)

The only auto locking hubs available in '77 that I'm aware of were the Warn auto-lock hubs. Visually they looked the same but said 'auto' somewhere on the dial. I don't know if they were available for the Broncos or not - I do recall them being available for the externally bolted hubs on Jeeps and Scouts.

Todd Z.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
The only auto locking hubs available in '77 that I'm aware of were the Warn auto-lock hubs. Visually they looked the same but said 'auto' somewhere on the dial. I don't know if they were available for the Broncos or not - I do recall them being available for the externally bolted hubs on Jeeps and Scouts.

Todd Z.

I vaguely recall those..but thought they were around later. Perhaps not.

Aha. They were around in '77......but used the "big bolt/threaded hub" mounting found on Scouts, for example..but not Broncos.

attachment.php
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
They were common from some of the factories later on, in the mid-eighties or so, but I'm thinking you're right and they were not available in the standard "internal" types we used. Those memories are pretty vague nowadays though.
By that time too, Warn was the O.E. supplier even for the regular hubs, so that would follow that the auto-lockers were Warn's too.
The factories may have put some pressure on them to develop a version of their older design for the internal workings of the common trucks. Used to see them all the time on GM trucks.
We also replaced 90% of them with manual lockers too, when everyone would complain about them not working properly. After all, for that you had to actually "maintain" them on a regular basis!

Maybe I've got an old Warn book around here that will give us some decent info.
Oh goody, something else to dig for!

Paul
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I vaguely recall those..but thought they were around later. Perhaps not.

Aha. They were around in '77......but used the "big bolt/threaded hub" mounting found on Scouts, for example..but not Broncos.

attachment.php

Correct - those were the ones I was referring to in my post. Two Warn ads I specifically remember from those days touting those hubs: the guy in the Scout crossing the stream on two logs, and the infamous Jeep pickup on the narrow shelf road (which EVERYONE swore they knew where it was!).

Todd Z.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
They were common from some of the factories later on, in the mid-eighties or so, but I'm thinking you're right and they were not available in the standard "internal" types we used. Those memories are pretty vague nowadays though.
By that time too, Warn was the O.E. supplier even for the regular hubs, so that would follow that the auto-lockers were Warn's too.
The factories may have put some pressure on them to develop a version of their older design for the internal workings of the common trucks. Used to see them all the time on GM trucks.
We also replaced 90% of them with manual lockers too, when everyone would complain about them not working properly. After all, for that you had to actually "maintain" them on a regular basis!

Maybe I've got an old Warn book around here that will give us some decent info.
Oh goody, something else to dig for!

Paul

Paul: I think you're spot-on with your guess - auto locking hubs on the Broncos/F-150s/Blazers, etc. were early/mid-80s and I always recommended people replace them.

"Locking the hubs" is one four wheeling ritual I enjoy - even when I have to crawl across the hood to do it.

Todd Z.
 
OP
OP
Old School

Old School

Sr. Member
Joined
Jun 22, 2011
Messages
440
Loc.
AZ
I looked at my Marti report.

Under optional equipment mine was ordered with "Free Running Front Hubs"
 

NGABronco

Contributor
Always Learning
Joined
Feb 4, 2007
Messages
7,574
Loc.
N. GA now South Carolina
Where in your Bronco did you find the build sheet?

hey Jack, the PO found it under the rear carpet, it also had this mat under the rear carpet, a few have said they've seen it, some say it came in 78'??? It looks to be a factory item, all the holes line up, rear seat & seat belts.%)%)
 

Attachments

  • DSCN3965.JPG
    DSCN3965.JPG
    159.8 KB · Views: 89
OP
OP
Old School

Old School

Sr. Member
Joined
Jun 22, 2011
Messages
440
Loc.
AZ
hey Jack, the PO found it under the rear carpet, it also had this mat under the rear carpet, a few have said they've seen it, some say it came in 78'??? It looks to be a factory item, all the holes line up, rear seat & seat belts.%)%)

I've seen the rubber version of that mat but not that style.
None of my 77's have carpet.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Man, at $95 in '77 bucks, those were some pretty pricey parts!

My '71 had the mat, as did all of my buddies' '72's
Like OS said though, not the same coloring as yours. All black rubber under the mats to keep them flat. Mine had the semi-full coverage black rubber mats with no chrome strips, but the '72 Explorers all had the rough Parchment full-coverage floor mats with the chrome strip hold-downs.

Is that brown color just where it sat in some rusty water or something? Or are those some kind of strips attached to the bottom of the rubber? Looks too evenly colored for rust, which is why I was asking

Paul
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
Well the 77 that's in the shop was ordered by me. And yes when you start with a standard bronco the passenger and rear seats had to be added to the build along with free running hubs. The other options I ordered were cigar lighter, rear tire carrier and the heavy gvw package.
Steve
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Well maybe it was right but still it appears to me it was a way to get more money out of the purchaser. Guess it sucked to buy a new 77 as you had to pay extra for what was standard in previous years. Of course they dont tell you that all this stuff was pretty much ordered by the dealers selling them anyways.
 
OP
OP
Old School

Old School

Sr. Member
Joined
Jun 22, 2011
Messages
440
Loc.
AZ
Well maybe it was right but still it appears to me it was a way to get more money out of the purchaser. Guess it sucked to buy a new 77 as you had to pay extra for what was standard in previous years. Of course they dont tell you that all this stuff was pretty much ordered by the dealers selling them anyways.


That depends entirely on what the base MSRP for a 77 was compared to a 76.

It doesn't necessarily cost more if you start at a lower base price and add from there.

There's no difference between a $4100 Bronco with a "free" seat or a $4000 one with a $100 optional seat.


And it's all listed in that brochure that is "maybe" right and it's on the window sticker so buyers knew what they were paying for.
 

NGABronco

Contributor
Always Learning
Joined
Feb 4, 2007
Messages
7,574
Loc.
N. GA now South Carolina
Man, at $95 in '77 bucks, those were some pretty pricey parts!

My '71 had the mat, as did all of my buddies' '72's
Like OS said though, not the same coloring as yours. All black rubber under the mats to keep them flat. Mine had the semi-full coverage black rubber mats with no chrome strips, but the '72 Explorers all had the rough Parchment full-coverage floor mats with the chrome strip hold-downs.

Is that brown color just where it sat in some rusty water or something? Or are those some kind of strips attached to the bottom of the rubber? Looks too evenly colored for rust, which is why I was asking

Paul

Paul, that's the bottom, it's a foil covered fiber board (of some type) with the fiber board strips (2 deep) stapled to it. The top is a smooth foil. And yes those are some rusty spots!!!!%)%)%) I have what's left of one of the rubber mats you speak of, it came out of my 73' Ranger, now known as "Stretch"!!
 

Attachments

  • FSCN3979.JPG
    FSCN3979.JPG
    179.9 KB · Views: 27
  • FSCN3983.JPG
    FSCN3983.JPG
    155 KB · Views: 32
  • DSCN3975.JPG
    DSCN3975.JPG
    130.4 KB · Views: 28
  • DSCN3976.JPG
    DSCN3976.JPG
    186.5 KB · Views: 28

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
Paul, that's the bottom, it's a foil covered fiber board (of some type) with the fiber board strips (2 deep) stapled to it. The top is a smooth foil. And yes those are some rusty spots!!!!%)%)%) I have what's left of one of the rubber mats you speak of, it came out of my 73' Ranger, now known as "Stretch"!!

I guess the foil would also help with heat.
 

ohpoo2

Sr. Member
Joined
Dec 21, 2005
Messages
885
Paul, that's the bottom, it's a foil covered fiber board (of some type) with the fiber board strips (2 deep) stapled to it. The top is a smooth foil. And yes those are some rusty spots!!!!%)%)%) I have what's left of one of the rubber mats you speak of, it came out of my 73' Ranger, now known as "Stretch"!!


My 77 had that type board in it and found part of the option sheet under it I though it was built by the upholsterer but now I know it was not. Thanks
 
Top