• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

leaking d20 need help

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
be sure to ask them if those seals are in that kit when you call them. that price sounds cheap to me, it may not include those seals.

check with your local part store, they might have them also. it might not be in their computer, ask them to look it up in their books.
 

msuforeman

Sr. Member
Joined
Mar 30, 2003
Messages
427
I just took my front pinion off on Sunday. It turns out my yoke had a groove worn in it enough even a new seal wouldn't seal it. I would make sure you look at your yoke while changing the seal. Also, take the 4 bolts off the bearing retainer because it makes changing the seal a snap.

Brian
 

grs44310

Sr. Member
Joined
Feb 23, 2005
Messages
490
Loc.
Akron, Ohio
My front yoke leaked around the splines after I installed a new seal. An O-ring under the nut or some silicone on the splines will help take care of this problem if your's leaks in the same place.
 
Top