Well I have almost made it to the end of the frame up restore, all I thought I had left was to bleed the steering and the brakes. I started with the brakes just putting the fluid in and letting gravity do its thing. After a few minutes the job got alot bigger. Almost all of my connections had leaks. I understand some of the connections that I flared myself, but even the hard lines I bought for the front had leaks. It has been sitting for over a year with no fluid while the project was going on. I made sure that all the connection were tight, but still have leaks. What should I do. Leaks at the H block and at the juctions front and rear. I had to do something wrong. I even had a leak at the caliper for my rear disk and I installed new copper washers. I went from taking the rig around the block for the first time in a few hours to a total mess. Thanks 69sport