• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

Broncoholic1

Sr. Member
Joined
Sep 12, 2008
Messages
405
Lookin good! I will keep on lookin in to see your progress.. Might have to get one of them goin
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
The weather is not cooperating. It looks like we are on for this Friday. Look for an update (with pics) soon.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
We got the spring towers fitted in place, and tacked them in. They sit level with the crossmember, taking into account the approximate 3" rake we are shooting for. If the math is right it should be close.
 

Attachments

  • 000_0040.jpg
    000_0040.jpg
    114.2 KB · Views: 140
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
We moved on to the frame notch, while we had the frame right side up. The rear brake bracket located on the drivers side was removed with the torch.
 

Attachments

  • 000_0041.jpg
    000_0041.jpg
    64.4 KB · Views: 96
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I used the bump stops as a center line for the notch. We lined up the side pieces of the notch kit making sure that they maintained square with each other, as well as the side of the frame itself. The sides and top cap were tacked into place.
 

Attachments

  • 000_0042.jpg
    000_0042.jpg
    84.5 KB · Views: 120
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
With the top and sides tacked in place, we flipped the frame upside down. That makes it easy to torch out the notch, which includes the stock bump stop assembly. After torching them out the area is then ground to allow the bottom cap to be layed in place and tacked welded in.
 

Attachments

  • 000_0049.jpg
    000_0049.jpg
    74.4 KB · Views: 104
  • 000_0047.jpg
    000_0047.jpg
    112.8 KB · Views: 110
  • 000_0044.jpg
    000_0044.jpg
    72.5 KB · Views: 105
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I really like the look. Very clean and smooth, and it really should be stronger than stock. I will post more pics when the welds are finished and ground smooth.
 

Attachments

  • 000_0050.jpg
    000_0050.jpg
    58.8 KB · Views: 93
  • 000_0051.jpg
    000_0051.jpg
    59.9 KB · Views: 103
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
We did some more grinding and welding today. I smoothed and cleaned up the welds, and it looks good. Tomorrow we will finish the welds, and fit the A arms into the crossmember. I do not want to assemble everything with the coils installed yet, as it will be going back to sandblast and then on to galvanized dipping. I will post more pics of our progress tomorrow when I get home.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Finished the welding for the Mustang II IFS and the rear notch. After the welding was done, I ground and polished up the welds with a 4 1/2" grinder and a belt sander. My partner thought that I was getting pretty picky using the sander but it allowed me to get into the tight corners better. He prefers to use a flapper wheel. Next we will be bolting in the A arms and rack to confirm the fit and function. We are close to setting in the 4.6 DOHC and mocking up the mounts. Sorry about the blurry pics. Maybe I need to clean my lense on my camera...
 

Attachments

  • FRAME BACK.jpg
    FRAME BACK.jpg
    120.2 KB · Views: 86
  • FRAME1.jpg
    FRAME1.jpg
    93 KB · Views: 110
  • IFS1.jpg
    IFS1.jpg
    92.6 KB · Views: 90
  • notch1.jpg
    notch1.jpg
    96.9 KB · Views: 106

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
It all looks really good, and strangely familiar.;D

Sitting idle with mine after purchasing a big gas tank that will not work on a lowered bronco. That and the thought of cleaning and coating the underside of the tub before putting the frame back.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Thanks again behemoth! The notch kit worked out great. I am going to have my frame galvanize dipped when we get it done. It has to be planned out and scheduled, as it will have to be driven straight over from the sandblaster and dipped into the tank right away. Otherwise the galvanized coating might not stick properly, according to the tech guy.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I was thinking of using the original tank. I was hoping to be able to make it work with the EFI on the 4.6 DOHC.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
There is no real issue in using the original tank if it is in good condition. I just wanted to run an in tank pump to keep the frame rails as clear as possible. With the lowered suspension and the 4 link I did not figure there would be a whole lot of room for a pump, filter, and exhaust to run through there.

In the end for me I will probably have to get a custom tank to use an in tank pump and keep the ground clearance for the tank.
 
Last edited:

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
cheaper to lift one, buy bigger tires, and re gear both axles than it is to lower it.

Stock height, stock suspension and be done with it.
 

broncomitch

Bronco Guru
Joined
Jan 17, 2008
Messages
2,384
Loc.
west jordan, utah
about what i was thinking. but it would be a cool little driver.. i was thinking taking the coils out and lower the front end till i have about 2 1/2" from the closest point the the frame and axle and getting custom coils made...or air bags or coil over. with large rims 17'' or 20"s and do a spring under in the back. i have the drivetrain out of a 2001 svt lightning........;)
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I found a set of NOS Ford Musang II upper A arm bolts online. After setting the lower A arms up to the crossmember, I realized that I was about 5/16" long on the back tubes where they mount. Now I know why the guy at Heidt's wanted to know if I wanted them to weld them in, or wait and weld them in myself. I trimmed off the extra 5/16" and cleaned up the ends. The A arms bolted right up!
 

Attachments

  • 100_5191.JPG
    100_5191.JPG
    246.9 KB · Views: 94
  • 100_5196.JPG
    100_5196.JPG
    158.6 KB · Views: 103
  • 100_5204.JPG
    100_5204.JPG
    194.6 KB · Views: 152
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Next on the list will be setting the motor mount towers back into place. We had to cut them off in order to weld the Mustang II crossmember in position. I will clean them up and then we can bolt them to the Mark VIII using the custom made motor mounts (Tumblin Automotive).
 

Attachments

  • 100_5201.JPG
    100_5201.JPG
    175.9 KB · Views: 78

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
odd that the stand offs were to long. that was one thing that was correct on both of my cross members.
 
Top