• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

My LS3/6L80e Engine Swap…..no haters please.🙏

OP
OP
WPS 73 Bronco

WPS 73 Bronco

Contributor
Full Member
Joined
Jan 12, 2023
Messages
300
Loc.
The Woodlands, Tx
I feel like I've crossed a major milestone on this build. From the Radiator to the Transfer case, everything is installed. It been a big clime to get to this point, but it feels like it's downhill from here. When I did a similar project 10 years ago on my 72 corvette, it took 2 years. I think I'm only 2-4 months away from driving this one, which would end up taking 12-14 months. I plan to dedicate some time during the Xmas holidays to focus on it. My punch list is getting shorter. Below are the big items:

- Finish coil to spark plug wiring
- Transmission and TC shifter cable install
- Install Transmission oil cooler
- Button up final wiring (5 to 7 different connections to be completed)
- Exhaust system - I bought the Duff SS Dual exhaust kit. I know it will need to be modified.
- Rear diff 3rd member and axle swap followed by driveshaft installation.
- Brake bleeding
- Fluid fill and first crank :oops:. I could actually do this now with just a little bit of work.
 

1969miller

Contributor
Full Member
Joined
Jan 18, 2022
Messages
186
Loc.
Elk Grove
what are your plans for spark plug wires? The headers i have for my 6.0 are tight, way too tight for the stock plug boots.
 
Top