• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

NV3550 & T-case Linkage

jbregar

Jr. Member
Joined
Mar 10, 2009
Messages
122
Loc.
Pueblo, CO
My t-case linkage doesn't seem to fit together at all with the NV3550 installed. Am I supposed to have to bend it to align it? Mine's almost like the t-case is clocked up too high.

My adapter has three sets of bolt holes. The bolts are in the furthest clockwise (as you look from the transmission side at the t-case's spud shaft). It seems like to get the lowest clocking, I'd want the furthest counter-clockwise, right?
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
You want the top set of holes. This should clock the TC down low into the notch in the cross-member. I bet you haven't tried to fit your front driveshaft at your current clocking yet? You'll find it would run at an angle and likely be too short and interfere with your driver side exhaust at your current clocking.
 
OP
OP
J

jbregar

Jr. Member
Joined
Mar 10, 2009
Messages
122
Loc.
Pueblo, CO
Yeah. Advance Adapters instructions say "furthest clockwise" for stock clocking. It's obviously wrong after looking at it.
 

shamu

Lucky as the day is long.
Joined
Jun 18, 2009
Messages
5,290
Loc.
Sachse,Tx
Look at these pics.
 

Attachments

  • nv 3550 004.jpg
    nv 3550 004.jpg
    91.4 KB · Views: 63
  • nv 3550 005.jpg
    nv 3550 005.jpg
    63.9 KB · Views: 65
  • nv 3550 006.jpg
    nv 3550 006.jpg
    95.3 KB · Views: 79
  • nv 3550 007.jpg
    nv 3550 007.jpg
    85.1 KB · Views: 71
  • nv 3550 008.jpg
    nv 3550 008.jpg
    81.4 KB · Views: 73
Top