jbregar
Jr. Member
My t-case linkage doesn't seem to fit together at all with the NV3550 installed. Am I supposed to have to bend it to align it? Mine's almost like the t-case is clocked up too high.
My adapter has three sets of bolt holes. The bolts are in the furthest clockwise (as you look from the transmission side at the t-case's spud shaft). It seems like to get the lowest clocking, I'd want the furthest counter-clockwise, right?
My adapter has three sets of bolt holes. The bolts are in the furthest clockwise (as you look from the transmission side at the t-case's spud shaft). It seems like to get the lowest clocking, I'd want the furthest counter-clockwise, right?











