• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Oil temperature gauge

661buster1963

Full Member
Joined
Feb 18, 2009
Messages
309
I have a buddy with a full size Chevy( I pray he sees the light some day) it’s older rebuild, runs pretty strong (454). It’s not stock but not a crazy motor either. He installed an oil temperature gauge, water temp, vacuum, oil pressure and volts. He kept telling me the oil temp is key, much more than water temp. To be honest I am not sure I have ever seen an oil temp gauge, anyone else run one and why?
His engine is carbed, headers, 4 speed with atlas transfer case if it matters. The same guy had a knot in the coil wire too, heard him telling someone else it was to keep him from getting as many speeding tickets, a governor of sorts, so his integrity is a little questionable; plus he works at a speed shop so maybe he just got a sweet deal on the gauge.
It was interesting that water temp comes up pretty quick but not so much on oil temp. Plus when he tows the oil temp runs a little warmer than the water temp.
 

Skytrooper15

Full Member
Joined
Sep 13, 2018
Messages
216
Loc.
Tuscaloosa,Al
Well,you say he drives a chevy?He must just like to pull other peoples leg a lot.Water temp and oil pressure is good for most trucks and I notice my 2013 F-150 has a transmission temp gauge but as far as tying his coil wire in a knot,is one of your legs longer after he said that?Did you tell him that a chevy runs better with a potato stuck in the tailpipes?
 
Last edited:

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Oil temperature is good to know, but I don't think it's as helpful on our rigs as a water temp gauge is. So I would never use oil temp in place of water temp. Just as a supplement.
It's popular on air cooled engines, even though they still use cylinder head temps as a main guide.

Water temperature on our engines is more indicative of things that normally go on, can be just as, if not more helpful than the internal temperatures, and as you noted reads the ups and downs of temp changes much quicker than oil temps do.
What's good to know oil temperatures for is if you have issues that raise the oil temperatures up to and beyond their healthy levels.

But if choosing just one, water temp is the way to go.
I'm sure I'm leaving something out, and there may be good arguments for oil vs coolant. But I don't know what they may be.

And maybe it's an old wives tale that had some basis in fact many decades ago, and maybe an old coil wire can have some property that makes a knot tied in it react somehow, but other than that, I would not trust my driver's license to the hope that it would reduce my speed like a governor.
The spark doesn't care unless it's reacting to leakage through the casing letting the magnetic field create some sort of misfire. Guessing that circumstance can't be good for the engine though!
I bet he had a lot of fun with that description though...

Paul
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Oil temperature is almost directly correlated with engine RPM. I have had a fair number of vehicles with factory oil temp gauges. Hold 6000 RPM for 10 minutes (it sounds good) and the oil temp will climb. Played around with it and found that even under light load it climbs with just RPM.

Oil does warmup much slower than water. A fully warmed up engine is when the oil is warmed up, not just water. Many new cars will have oil to water coolers, This has a dual role. Not only will it keep the oil cool but since the water warms up faster it is an oil heater first.

Does this mean anything in a Bronco? No. Unless you are racing it the oil temp is self regulating. It runs a bit hotter then water temp. But the oil running down the inside of the block will shed heat into the coolant. The vintage Boss302 mustangs had an oil cooler but they were built to race 7000 RPM SCCA road race tracks. You will see oil coolers on the Explorer V8s, that was the ability to hold 5000 RPM towing up a grade at full throttle for 12 miles in Arizona. (I have a friend who did his college project with Ford setting up towing guidelines and have worked with the SAE J2807 towing)
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I run oil temp gauges (and oil coolers) on any of the high-performance marine engines I run. As already noted, oil temps will climb when the engine is operated at high(er) RPM and fully loaded. Being able to keep an eye on the oil temp when making long high-speed runs is valuable in that case...

I've never bothered to install an engine oil temp in a wheeled vehicle.
 

bronkenn

Contributor
Bronco Guy
Joined
Apr 27, 2017
Messages
2,717
Loc.
Southeast Ohio
I have only used this type of oil temp gauge.
 

Attachments

  • Oil-Temp.jpg
    Oil-Temp.jpg
    51.1 KB · Views: 117

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,484
Loc.
Statesville, NC
Hi, the real issue with oil is thermal breakdown.
Before modern synthetic oil was available at a reasonable price thermal breakdown was a real issue.

In the 80s and 90s I did quite a bit of beach driving, and if you hit soft stretches of sand the RPMs and temp went up. I fixed that with a Hayden oil cooler. The cooler adapter went on the oil filter adapter and had a thermostatic spring, to bypass the cooler until @170*.

I read, probably in a Smokey Yunick book, that the old conventional oils would smoke at temps near 300*
Modern synthetic oil won't burn until near 500*, and your engine will never get near that.
I've "heard" that synthetic blend oil, like the Motorcraft oil used at the Ford dealership is almost as resistant to thermal breakdown as is full synthetic.

As mentioned, Ford did install factory oil coolers on many engines, including 429 police interceptors.

Good luck
 

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Oil is used to cool the valve springs. Yes I said valve springs. The internal engine parts like crank and rods ride on a thin layer and they do not get hot (unless it is already too late). But the oil in the heads is an oil bath to the valve springs.

In racing this really matters - at high rpm the valve springs get incredibly hot that is why you see an increase engine temperature as rpm rises. In our trucks they never see this kind of rpm. Certain engine designs like BBC or Hemi really put a ton of stress on the valve springs and all the oil coming up the pushrods does a lot more than lubricate the pivot balls in the rocker arms.

Oil temperature really matters when it gets very hot then the oil fails and then you lose bottom end lubrication. In our trucks we never see the rpm higher enough or long enough to cook the oil unless your cooling system fails you.
 
Top