• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

parts list - needle haystack I know

Sprintervanlife

Jr. Member
Joined
Dec 1, 2018
Messages
57
After wasting a few years with builders or looking for a used bronco(mostly stock) to replace a '68 that I stupidly sold years ago, I'm seriously thinking about buying a rolling chassis and complete body( both time/skill saver) and building it myself. I have the chassis spec'd out, body and a new engine and some parts but I'm wondering if anyone has a good list of parts required to complete other than known complete chassis and body and drivetrain. I've started a list and have the obvious stuff but I know I'm overlooking many things. I've been looking up parts in WH catalog to get an idea of costs but if anyone has a list that I trust better than mine, I would appreciate it.
Thanks
 

suckerpunched

Sr. Member
Joined
Aug 24, 2006
Messages
882
sorry no list, but i would recommend buying a complete assembled and fitted body with everything hung in place, doors, hood, grille, tailgate. If you don't you will learn about doing extensive bodywork anyway. Hopefully they will provide all the hinges and latches required for that.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Weren't they selling complete new bodies on here for 12-15k welded? Wasnt bad compared to the cost and headache of lining it all up yourself.
 

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
without a donor all of the small parts and hardware will be a major search and learn experience. Factory shop manual diagrams will break down every single part but I could not imagine having to source them all individually. Some do so I assume they will speak up on this. Good luck
 

chuck1022

Contributor
Sr. Member
Joined
Feb 25, 2017
Messages
620
I was kind of thinking of something similiar-ish. I have a 1977 as a Daily Driver and I dont want it to be off the road......so I was thinking of buying a Krawlers Edge chassis and going from there. IF it takes me a few years...I wont care cause I have 77 to drive



After wasting a few years with builders or looking for a used bronco(mostly stock) to replace a '68 that I stupidly sold years ago, I'm seriously thinking about buying a rolling chassis and complete body( both time/skill saver) and building it myself. I have the chassis spec'd out, body and a new engine and some parts but I'm wondering if anyone has a good list of parts required to complete other than known complete chassis and body and drivetrain. I've started a list and have the obvious stuff but I know I'm overlooking many things. I've been looking up parts in WH catalog to get an idea of costs but if anyone has a list that I trust better than mine, I would appreciate it.
Thanks
 
OP
OP
S

Sprintervanlife

Jr. Member
Joined
Dec 1, 2018
Messages
57
sorry no list, but i would recommend buying a complete assembled and fitted body with everything hung in place, doors, hood, grille, tailgate. If you don't you will learn about doing extensive bodywork anyway. Hopefully they will provide all the hinges and latches required for that.

That is my plan - a complete tub w/ hinges and latches etc
 
OP
OP
S

Sprintervanlife

Jr. Member
Joined
Dec 1, 2018
Messages
57
Will it be that hard? It seems like a lot of the WH or Toms etc sell a lot of "kits" for x,x,z...
Chassis will be pretty complete as well as body and if I have engine/tranny xfer case and I have done wiring harnesses before -maybe I'm just fooling myself
 

bamabaja

Contributor
Sr. Member
Joined
Mar 25, 2012
Messages
729
Loc.
The Shoals
This may not be what u looking for but I snapped these at SC of beautiful truck that was for sale. I thought great list for general info and restoration. Good Luck.
 

Attachments

  • 1EB1FE80-1A3D-4E7E-9772-F57845F226D8.jpg
    1EB1FE80-1A3D-4E7E-9772-F57845F226D8.jpg
    72.4 KB · Views: 119
  • 501994E2-5FEC-4013-968A-EE37DFE945C6.jpg
    501994E2-5FEC-4013-968A-EE37DFE945C6.jpg
    66.2 KB · Views: 122
  • 142FE1FD-00E9-48EE-BE6D-5E6C62E838DB.jpg
    142FE1FD-00E9-48EE-BE6D-5E6C62E838DB.jpg
    59.2 KB · Views: 106
  • B82CC37D-F894-4980-9C85-564960F169F5.jpg
    B82CC37D-F894-4980-9C85-564960F169F5.jpg
    52.3 KB · Views: 108

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
This may not be what u looking for but I snapped these at SC of beautiful truck that was for sale. I thought great list for general info and restoration. Good Luck.

nice comprehensive list there...
 
Top