• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Question for the engine GURU's

Engine #1 or engine #2 ??

  • NEW HP 302/5.0

    Votes: 2 6.9%
  • Freshened up '94 351 roller with da' Trick Flows

    Votes: 27 93.1%

  • Total voters
    29
  • Poll closed .

Miker

Bronco Guru
Joined
Jul 15, 2009
Messages
1,576
Ok, can anyone who cares to, chime in on which is a better engine for the Bronco? I have both and want to see what you guys think:

Engine #1
Brand new HP 5.0 with windsor firing order (Surefire engines) with advertised 300HP and 336 TQ. 9.0-1 comp., Hypers, cast oe iron heads, at 1.77 intake 1.46 exhaust - lumpy cam at like .498 .498 lift 219/219 duration. Edelbrock manifold

Engine #2
Used '94 roller 351 from F-350 with 67,000 miles or so on it. (I saw it run in the F-350 prior to being taken out and seemed fine). Had a machine shop go through it - guy said he was amazed at the cross hatch still left, re-ringed it, added trick flows with new 2.02 intake valves and I believe like a .194 exhaust vales, all new, , heads were shaved slightly so I'm guessing around 60cc's? Comp Cams 1.6's put on the heads, new rods, stayed with stock cam, new timing chain, Edelbrock manifold.
stock pistons with a relief so big you could have a square dance. So, I'm thinking stock comp. around 8.3-1 ?? Not sure with the trick flows what that would have changed it to.

Daily driver/kinda' sorta' show rig type driving most likely. Love to hear what everyone has to say, come to think of it, lets put a poll in here:cool:

But, more interested in your thoughts, see where this goes... Thanks folks.
 

frdboy

Contributor
Full Member
Joined
Jul 16, 2013
Messages
313
I would do the 351 hands down, more power everywhere than that 302 even with the stock cam. I would probably stick a cam in it before it went in.....something mild...I have a Lunati 51014 in my 351W that was given to me and I like it.
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
I went 351W and LOVE IT. Came out of a 96 E350. It too was clean. Didn't need anything but I punched it 0.020 over and did a rebuild.

Stock compression with E7 heads (64cc I think) was about 8.8:1

The 351W project can get tricky (mine did) with getting in to fit under the hood as well as header fitment and front dress.

Tim
 

Digger556

Sr. Member
Joined
Aug 8, 2013
Messages
801
I love my 351W, but there will be challenges with fitment. They will fit, but everything get a little tighter.


If you use the throttle cable as a reference point, you can see how much taller this engine is, especially if you have roller rockers like I do.
20160628_143826_zpslm3h6sqy.jpg
 

Slednut10

Contributor
Guru? That's funny!
Joined
Sep 26, 2013
Messages
2,398
IMHO, the lumpy cam is a deal breaker for the 302, and since you already have the 351............;D
 

House

Contributor
Minutia Militia
Joined
Aug 12, 2004
Messages
2,440
OK, I'll be the outcast...
Small block Ford for the win! :cool:
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
I have a 351W in mine, and the torque is just nice for drivability. The 302/5.0 you noted sounds like a decent little pony car motor, but wouldn't even by my third choice for an EB.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
What about a stroked 5.0. HP in the smaller package?

x2 on the stroker.

Better sized package for the Bronco engine space.

Better cooling more often too, not saying there are no problems with the smaller block, but many more that put a 351W based engine in seem to struggle with cooling issues.

When I looked at costs, comparing building EFI 351W and fitting it into a Bronco vs stroking an EFI 5.0L there wasn't much difference.
 

norm02

Full Member
Joined
Feb 8, 2016
Messages
336
351 hands down. I'd bump the CR up unless you have a hard time getting 93 octane gas.
 

LilMixedUp

Full Member
Joined
Feb 27, 2016
Messages
167
Loc.
Bonaire
I've had both and my current driver is a 347 stroker; with a 351W in shop waiting to go into the next one; So, like many above I love the 351W motor. I never had cooling issues with 4 core Rad and full shroud and Duff used to make a short throttle arm specifically for the 351; don't know if they still offer it, because it's been 20+ years ago when I bought it. Just depends on your patience for the install.
 

Jebus

Full Member
Joined
Feb 13, 2011
Messages
303
Loc.
Longview, WA
Look up the torque curve of both engines stock. That should sell you on the 351.

Thats why the crankshaft on a 351 is so stout. There is no comparison at 2000 rpm...
 
Top