• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Questions about Smittybuilt Rollbar install....????????

71BroncoBoy

Full Member
Joined
Aug 21, 2005
Messages
194
Loc.
Tallahassee, FL
Finally got the rig Line-X'd and now ready to install the smittybuilt rollbar, It seems to line up nicely except the tabs on the right and left on the vertical piece that are supposed to line up on the rails, one of the sides doesnt line up flush with the right side on the rail but ill just put some washers or someting so i can tighten it down...any recommendations on what else to use...

I want to install it myself and do it once and perfect the first time with no mistakes, any tips or tricks to make this install go smoothly as possible and safe????

different bolts maybe? or just use the stock ones?
 

sfaforester

Contributor
Bronco Guru
Joined
May 12, 2002
Messages
2,269
Loc.
SW, Arkansas
Mine didn't line up either when I put mine in. I would just buy some big washers and stick them in the gap to make a solid connection between the roll bar and the fender. It may not look the prettiest, but that's a safe route to take.

Edit- I'm trying to remember what mine looked like...there were some tabs about 5 or 6 in up from the bottom that I didn't bolt in cause they weren't touching anything. The ones on the floor and fender should be fine. But if you really wanted safety, you would go with a crabcage....or protofab.
 

j.r.nice

Bronco Guru
Joined
Feb 8, 2004
Messages
1,615
Mine didnt either, on the stock or fiberglass body. I do recommend the rollcage extension for the front. It makes a mice support for the windshield while topless.
 

Dan's73

Bronco Guru
Joined
Oct 17, 2006
Messages
1,117
I did the bar & front cage together.....a good way to brace the windshield and at least a little piece of mind. I used some 1/8" & 3/16" plate to fill the gaps, assuming we're talking about the same thing. Worked out great, but now I need to get a full family cage made up so the l'il one can ride with me.
 
OP
OP
7

71BroncoBoy

Full Member
Joined
Aug 21, 2005
Messages
194
Loc.
Tallahassee, FL
sounds good dan, Ill probably have to look around for the front cage because I think its out of production...the smittybuilt alone without the front cage seems a little weak to take a serious rollover
 

SC74

Contributor
Bronco Guru
Joined
May 24, 2004
Messages
3,472
sounds good dan, Ill probably have to look around for the front cage because I think its out of production...the smittybuilt alone without the front cage seems a little weak to take a serious rollover

That's what most Broncos used to have and I'm sure it saved many a lives over many years. They are advertised now as "light bars" I think for liability purposes, but overall I'd say they are stout. But yes, a SERIOUS rollover would require more than any average cage. This all goes back to one of the most debated topics on this board...
 

kntr

Bronco Guru
Joined
Oct 7, 2006
Messages
2,277
Mine saved my buddy in a 55mph roll over. Smittybuilt is better than nothing.
 
OP
OP
7

71BroncoBoy

Full Member
Joined
Aug 21, 2005
Messages
194
Loc.
Tallahassee, FL
Can anybody post some pics of where exactly they placed their smittybuilt bar? ive done some searches but cant find any detailed pics...mine seems like it should have more length on the side bars
 

71_blue

Jr. Member
Joined
Jan 22, 2006
Messages
80
71BroncoBoy,

I just reinstalled my bar last summer. Her'es some pics of the original install. The right belt rail is bolted in but the left on uses large hex head screws due to the cover for the aux tank cover. I also mounted my hi lift jack with a muffler clamp and threaded rod. Works great.



Well, it won't let me post photos. I could email them.

Bob
 
OP
OP
7

71BroncoBoy

Full Member
Joined
Aug 21, 2005
Messages
194
Loc.
Tallahassee, FL
You mean width... where the tabs would bolt into the bed rails? I don't think I've ever seen anyone bolt them in there.

not the tabs that are supposed to attach to the bed rails, but the right and left side bars that go into the holes on the veritcal bar, in order for me to have the vertical bar flush with the floor and the wheel well inside the bed it seems like the part of the left and right side bars that go into the hole on the veritcal bar almost dont have enough length to make it so i have to lean the vertical bar back just a little to make it fit...
 
OP
OP
7

71BroncoBoy

Full Member
Joined
Aug 21, 2005
Messages
194
Loc.
Tallahassee, FL
71BroncoBoy,

I just reinstalled my bar last summer. Her'es some pics of the original install. The right belt rail is bolted in but the left on uses large hex head screws due to the cover for the aux tank cover. I also mounted my hi lift jack with a muffler clamp and threaded rod. Works great.



Well, it won't let me post photos. I could email them.

Bob

that would be awesome blue 71, my email is ericlesperance@mac.com
 
Top