BRONCITIS74
Full Member
- Joined
- Oct 4, 2015
- Messages
- 340
The time has come to replace my rear springs with the WH 3 1/2" lift springs. After a little struggling, I got the rear axle disconnected and out from under the truck. Now it's time to remove the bolts holding the springs on. They are frozen solid. I have been squirting them with PB Blaster for 2 weeks while I worked on the front. Will I have a problem if I used a cutoff wheel and cut the bolts out of there? I don't have a torch, so I am out of options. All advice is appreciated. Thanks, Mike











