I have the small bearing which I would love to upgrade to large. However I cannot swing the 4k+ to do so
I was having a hard time figuring out your numbers here and how just switching to big bearings would get you to $4k. Then I kept reading and figure you're meaning it's adding another few hundred to whatever total you're putting together. Whew! Was worried there for a minute you were getting the wrong quotes!
New ends are probably under 100 bucks and you can have them welded on pretty easily. Or get a new HD housing for 400, or buy a used one for $150 or so.
...so back to reality I have 4.88's and a detroit I want to ditch the detroit and put in a ARB the PO kept the 28 splines when he upgraded. So my question is, is the axle shafts the same from large bearing to small bearing? being if I upgrade later will I be able to use my 31 spline axle shafts and just replace retainer and bearings?
As they have already said. Nope. Not that simple.
or anyone in northern CA or Southern Oregon have used large bearing they are willing to part with lol.
I'll have one at some point. Just don't have it ready to pull out yet.
But if you're not going to be ready for awhile yet, keep me in mind. Though there might be others ahead of you if they still need it.
But other than less expensive bearings and the fact that yes, they're stronger, do you actually need the bigger bearings? The small ones were perfectly fine for normal use.
If you are going to be running big tires and pounding around off road with a load of camping gear, I can definitely see the upgrade necessity. But if you're going to be pounding around town with modest sized tires and not abusing it (much) then the small ones will serve you well for many years.
Or if you just want bigger stock drum brakes, that's an easier way to get them. Just factor in brakes no matter what, as they're different between big and small.
And speaking of brakes... If you're contemplating one of the rear disc kits like our $900 version that includes axle shafts, it's expensive but opting for the 35 spline axles is only about $100 more than the 31's.
What size tires and engine though? Most of us don't really need 35's. Just nice overkill, but not totally necessary.
I'm not trying to talk you out of all the good stuff and the big bearings, and I prefer them too, but just checking to see if you really need them.
Paul