• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Thoughts on lowering...

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Yeller, it looks like you are running full width axles?

Yes full width D60 and 14 bolt. With 8" wide wheel with 4-1/2" of back spacing its not too wide.

I always forget how low the seats are until I see a pic with me in the seat, or sit in someone else's bronco. I've been told all it missing is a lady of Guadalupe decal and tassels hanging from the roof:p
 

Attachments

  • IMG_1557.jpg
    IMG_1557.jpg
    83.7 KB · Views: 87

36Fan

Full Member
Joined
Apr 9, 2017
Messages
252
I would do what it takes to get rid of the body lift and go from there..imo
 

PaveBronco

Sr. Member
Joined
Oct 30, 2012
Messages
914
Think yours looks great, pull a few leaves from the back to level it out and put a sway bar on the front. makes a huge difference.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
You can have stock suspension height in the rear and the axle can go all the way to the stock bare frame(bumpstops and bracket removed) and a 35in tire will just rub the top of the inner fender. I have 35s, no lift and about 5.5in uptravel till axle housing touches the frame. Don't remember how much the front tires could stuff before I cut out all the inner front sheet metal, but even with a 35, it's pretty far. I think at least to the stock bumpstops. May need to move your flares up a few inches
 
Top