• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tie Rod over conversion

Banjer Picker

Bronco Guru
Joined
Sep 25, 2006
Messages
1,405
I was trying to do a search on moving the tie rod to the top of the knuckles since i already need to change the passenger side TRE. Can any point me towards some threads? Can I retain the factory tie rod and do some flip n mods.

I currently have the knuckles from a 78 Big Bronco w/ JBG sleeves to accommodate my factory 1973 tie rod.
 
Last edited:
OP
OP
Banjer Picker

Banjer Picker

Bronco Guru
Joined
Sep 25, 2006
Messages
1,405
Saw the little write up on WH web site too. Since I have the cage drop track bar bracket welded to the frame, is that going to cause bump steer issues?

Thanks
 
OP
OP
Banjer Picker

Banjer Picker

Bronco Guru
Joined
Sep 25, 2006
Messages
1,405
Tie rod/ drag link are all 1973 OEM factory parts. Currently have a 3" lift and dropped pitman arm. Will be running a WH 4.5 lift.

Doesn't bother me too much on the bottom, just thinking since I've already got my front axle pulled (and a worn TRE) I might look into it.
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
Tie rod/ drag link are all factory. Doesn't bother me too much, just thinking since I've already got my front axle pulled (and a worn TRE) I might look into it.
I'm thinkin' since you've already got sleeves to make the stock Bronco TREs fit the hole, that there's no way you could ream out the knuckles from the top and fit the stock TREs. I'm literally in the middle of going TRO, using 79 knuckles, but doing the Chebby 1 ton conversion. Those TRE studs are much larger than the stock Bronco ones.

Oh, and yes, when you go TRO, you have to rethink the front steering geometry, and I'm guessing the dropped track bar bracket will be the first thing to go. But... That's not a bad thing...
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
I did the 78/79 knuckle swap with 73 linkage then did the TRO later on you need the TRO bushings from BC as well as your current adapter sleeves. You also need one for the drag link to swap sides on the tierod. You may want to consider installing a adjustable drag link though as with your lift and the TRO swap things might not line up with the steering box centered you might be able to remove the drop pitman arm as well. In either case a adjustable drag link will really help.
really I'd just go with one of the 3 way adjustable setups makes things a little easier and adjustable all around.
 
Top