• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Track (trac) Rise Bracket Options

snick

Contributor
Full Member
Joined
Feb 5, 2015
Messages
158
I decided on a track rise bracket but had a couple questions. First off, I have a 3.5" suspension lift and am doing the BC TRO heim steering set up with F150 knuckles and the BC adjustable track bar. I don't have all the equipment to make my own so I have to buy a track rise bracket. From the 3 available vendor options (kiser riser, duff, WH).

1. Are there any other vendor options out there?

Of the 3, I have narrowed it down to the Kiser Riser and the Duff because I only have a 3.5" lift and don't like the look of of the additional holes with the WH bracket. There are some great threads with pics on the kiser riser bracket but I wanted to see if:

2. Someone with the duff can take some pics of there installed bracket, in particular, a pic like this one

http://s7.photobucket.com/user/tyspin/media/IMG_0946.jpg.html

from the back of the bracket with it welded in place?

3. Anyone know the actual distance of the rise for either of these brackets? Duff doesn't mention it on their website.

I have noticed the kiser riser is made with 3/8" and the duff is made with 1/4" steel, both with reinforcements in critical places. It seems like most people are very happy with the strength of the kiser riser but didn't find much about the duff.

Found this excellent thread on the kiser riser install by JeepGuy
http://classicbroncos.com/forums/showthread.php?t=234398&highlight=kiser+riser

4. Are there any duff install threads? (couldn't find anything when I searched)

5. What options are there for raised bump stops?

Thanks in advance.
 
Last edited:

DuctTape

Bronco Guru
Joined
Jun 20, 2008
Messages
1,148
Loc.
Bozeman, MT
I put the wh riser on mine so can't help with most of your questions, but I can tell you that the vendors sell larger bump stops. I had to modify the pass side stop to fit with the riser, but it was pretty minor/easy, just some trimming.
 

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
my $.02 I have installed the WH and the Kiser riser.

WH needs trimmed after install if you use the bottom hole, I hit the frame a few times some day I'm gonna trim it down and install a bump stop, also the bolt for the track bar is not long enough, the bolts shoulder should go all the way thru the bushing but it ends short and the threads of the bolt are the other half of the bushing, the threads are smaller diameter so the bushing only rids on half the bolt.

Duffs 1/4" looks wimpy compared to the 3/8" its noticeable side by side more than the math says .

Kiser Riser addresses what I mentioned about the WH riser, no cutting of the bracket after install and the bolt is correct.
 
Top