TRO with BC Broncos new heim set up

[broncnut]

I'm getting ready to start on this and was wondering when I ream the knuckles for the bushings how far do i go with it? Do they need to be flush to the top of the knuckles? or deeper? Thanks for any help..

 

[Mr Joe]

Perfect timing.... I may start mine tomorrow ;D

 

[broncow72]

I just ordered mine yesterday ;D . I'd say... ask Chuck. It's his kit.

 

[73stallion]

i asked jason about 4 times so i'd get it right too. the top of the sleeve needs to be flush with the top of the knuckle.

 

[broncnut]

thanks guys, thats what I thought flush with the knuckles. Did you have to ream the pitman arm?

 

[brian72]

No on the pitman arm

 

[73stallion]

No on the pitman arm

ditto, didn't have to ream my pitman either.

 

[broncnut]

ditto, didn't have to ream my pitman either.

Chuck sent me 3 bushings, Whats the smaller one for? or do I not need it?

 

[73stallion]

don't know. can you post a pic?

 

[broncnut]

don't know. can you post a pic?

its the same as the ones for the knuckles just smaller. i can post a pic later.

 

[broncnut]

just talked to Chuck and he said I don't need that one.. ;D

 

[brian72]

the smaller one is for where the drag link would attach to the tie-rod if you were running a tie-rod draglink setup and doing TRO.