• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ultimate Raffle Bronco!!

OP
OP
J

jwtrapper

Full Member
Joined
Jan 6, 2010
Messages
181
Loc.
Van Lear, Kentucky
Our Painless Wiring Kit came in today. Cant wait to put that in, new switches too. Parts are starting to gather.

We are pulling the motor on Friday to take it down to Austin Automotive. Things are starting tom get moving with the build, but we still have a long road ahead.

I need axle shafts now. Thats what I'll be working on next.
 

rtj731

Sr. Member
Joined
Aug 20, 2007
Messages
407
Our Painless Wiring Kit came in today. Cant wait to put that in, new switches too. Parts are starting to gather.

We are pulling the motor on Friday to take it down to Austin Automotive. Things are starting tom get moving with the build, but we still have a long road ahead.

I need axle shafts now. Thats what I'll be working on next.


Contact this company, would be killer for the build,

http://www.rcvperformance.com/store/catalog/product_info.php?products_id=67
 
OP
OP
J

jwtrapper

Full Member
Joined
Jan 6, 2010
Messages
181
Loc.
Van Lear, Kentucky
We pulled the motor out today, came out without any problems. Took the motor down to Austin Automotive to let him work his magic on it. Austin Auto and D&K Engines are going to do the rebuild for us. Thanks guys for the all of the help and support.

21728.jpg

21729.jpg


Along with the rebuild it will be getting new Valve Covers, Edelbrock intake, Edelbrock oil cap and breather and few more goodies to dress it up a bit. All of this thanks to CKS Proshop (O'Reilly's).
 
OP
OP
J

jwtrapper

Full Member
Joined
Jan 6, 2010
Messages
181
Loc.
Van Lear, Kentucky
Here is an update on our axles

Front: Narrowed down High Pinion 44 to EB width. Yukon Shafts and Lockers Crane Hi Clearance knuckles

Rear: Spidertrax 9" Housing 3" 3/8" wall, TrueHi9 Third Member with Yukon Shafts and Locker.

I am still working on brakes front and rear.

351W, C6 Transmission, 203/205 Doubler, TrueHi9 Spidertrax rear axle. How cool is that!
 

ManTruck

Bronco Guru
Joined
Apr 17, 2003
Messages
1,271
I cant believe I have missed this thread until today. Great start and will be a great rig. I have just installed a new windshield and gasket in mine. I still have the old gasket which was not old, but I put a new one in. I would get that over to you and would also pick up the windshield over head if needed. I can install it and save a few bucks if that would help. Just let me know if you are interested.

Dave
 
OP
OP
J

jwtrapper

Full Member
Joined
Jan 6, 2010
Messages
181
Loc.
Van Lear, Kentucky
I would like to thank my last two donors Don and Dave for their generous contribution. You don't have to be a big name company to make a difference.

[soap box] I'm not any big name myself I run our local 4wd club and work for a living like everyone else here. I like to wheel though and have seen too many trails close in the short time I've been around. I volunteered my club to do this because we do care and we want to make an impact. Our goal is to build the best Bronco we can so that we can do our part to raise money to save what we love. With the help of you out there that like to use your rigs and enjoy your public access we can make this project a success. [/soap box]
 
Last edited:
Top