My 1977 Bronco has recently been having a rough idle so I have taken the following steps:
1. Added Sea Foam (no crazy smoking)
2. Oil Change and Filter Change
3. Checked fuel filter - doesn't seem clogged
4. Adjusted carburetor - I increased the idle RPM and adjusted air/fuel mixture so idle was not as rough; idle in park is around 700 RPM.
I've attached the vacuum gauge to the full vacuum advance on the carb and on the tree port behind the carb. I'm trying to learn as I go but I think the second connection is the right place to connect the vacuum gauge. As you can see on the pictures, the gauge settles at 14 inches for both port locations. The gauge will jump up into the green (43 - 55) when I hit the throttle but then settles back around 14.
Question 1: Are these good hookup locations for the vacuum gauge?
Question 2: Obviously, the steady 14 in. reading is not optimal. I've been using this website to figure out what the readings mean but I am still unsure what the issue could be. I can try to upload a video if that helps. Any ideas what could be wrong and/or what is needed to fix the problem?
Any insight you can provide will be very helpful. Thanks!
1. Added Sea Foam (no crazy smoking)
2. Oil Change and Filter Change
3. Checked fuel filter - doesn't seem clogged
4. Adjusted carburetor - I increased the idle RPM and adjusted air/fuel mixture so idle was not as rough; idle in park is around 700 RPM.
I've attached the vacuum gauge to the full vacuum advance on the carb and on the tree port behind the carb. I'm trying to learn as I go but I think the second connection is the right place to connect the vacuum gauge. As you can see on the pictures, the gauge settles at 14 inches for both port locations. The gauge will jump up into the green (43 - 55) when I hit the throttle but then settles back around 14.
Question 1: Are these good hookup locations for the vacuum gauge?
Question 2: Obviously, the steady 14 in. reading is not optimal. I've been using this website to figure out what the readings mean but I am still unsure what the issue could be. I can try to upload a video if that helps. Any ideas what could be wrong and/or what is needed to fix the problem?
Any insight you can provide will be very helpful. Thanks!











