What we have here are two perfect examples of rational thinking:
You guys are enlightened. You two are perfect examples of exercising vehicular passion that has not been muddied by emotions.
Im on board! As long as we all realize that the opinions posted regarding bell housing pattern compatibility are not relevant to the topic.
Chevy Bell housing patterns being unchanged for 60 years is not interesting from the perspective of re-powering a Bronco. Bronco's do not care if your 2005 LS motor will bolt to your 1967 Turbo 350. Neither will bolt to a Dana 20. The rest of the story is that there are dozens of different bell housings, half a dozen flywheels, multiple transmission index diameters, and the entire BOP incompatibility issue. Couple that with the oddball AMC Turbo 400 bell patterns, and from 1966-2001...(2020 for crate motors...) you actually have the same number of bell patterns for SBC and SBF. (exactly 1)
That's right. For 54 years, one pattern for the Small Block Chevy, and one pattern for the Small Block Ford.
So I will agree that a single bell pattern is a great argument for replacing a Chevy with a different Chevy. Unless you own a Buick, Oldsmobile, or Pontiac. Or is a Pontiac not a Chevy? Unless it shipped with a Chevy engine. Is GM still paying out on that lawsuit?
Box stock,and without enhancements...From 1965 to 2006 I can't think of any RWD GM transmission that is superior to its Ford counterpart. (not counting the previously mentioned E4OD) So why would I want a Chevy pattern bell housing?
C4 vs TH350 = same.
C6 vs TH400 = same.
AOD vs 700R4 = both junk
AODE vs 4L60E = still junk
E4OD vs 4L80E = gotta go GM
4R100 vs Allison 1000 = ugh. GM again.
RAT/RAN vs Muncie 3 speed = same
HEH/RUG vs Muncie M21, M22, and any T10 = Ford
T18 / T19 / NP435 vs SM420 / SM465 = same
M5OD vs NV3500 = yuck
ZF-S42/S47 vs NV4500 = same
T5 vs T5 = more junk
T56 vs T56 = seeing a pattern here.
TR3550 vs ??? = Ford by TKO!
ZF-6 vs UH-OH...no GM manual transmission
Since 2006, (that's 14 years!!!) GM has not put a manual transmission in their HD pickup truck. So why exactly do you still want a Chevy pattern bell? To bolt to the non-existent GM transmission? Now you are adapting back to something that isn't Chevy. So you need to find a better reason. You were doing great with:
A. Rear sump oil pan.
B. Cheap.
I like emotion...











