• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Why do I need a twin stick?

walker_creek

Jr. Member
Joined
Jan 17, 2010
Messages
90
If you have a j-shift Dana 20, you'll be able to shift with little more than fingertip pressure.

Plus, a twin stick gives you the options of front wheel drive only and 2wd
Low range. Probably one of the best modifications for the dollar.
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
I have a J shift and just put in twin sticks. The advantage is it now shifts easier because I'm only shifting the front or rear, not both at the same time. If you off road, there are times when you might only want low rear or low front with the other in neutral. Being a gear driven transfer case, binding is common but the twin stick takes care of that.
 

brandenpro

Full Member
Joined
Apr 23, 2012
Messages
234
Loc.
Salem, OR
Its fairly inexpensive, and easy to do with J shift. Not much harder with T.

You will actually be able to shift in and out of 4wd. Not to mention the flexibility. Limping out of the woods in front wheel drive alone 1 time will make you glad you did it.
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
no disadvantages that I can see other than installation. shifting the transfer case is far easier than wrestling with my old J-shifter. never had a T-shifter. advantage is that you can control both front and rear drives separately; one stick controls front drive and other stick controls rear drive. if your rear axle drive fails you can shift it into neutral and drive with the front axle which you can't do with either a J- or T-shifter.
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
I flat tow mine (remove rear driveshaft) and when I want to unhook I don't have to put the driveshaft in to drive it. And face it,there is a COOL factor to having all them shifters.
 

Attachments

  • CIMG0507.jpg
    CIMG0507.jpg
    95.5 KB · Views: 287

BRONCOBERT

Sr. Member
Joined
Sep 2, 2012
Messages
731
X3 on the col factor! The only disadvantage would be that it could be shifted into front low and rear high at the same time.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
The J-shift has more advantages. Mainly it gets rid of the wear prone stock shifter and can fix some of the issues that it causes when it wears.

T-shift there isn't that much advantage (other then replacing a part that has wear), that is until you get into the transfer case and work over the pills and rails. T-shift you have the exact same options in original and twin stick, just a different way to get to them. To some it is more confusing, others it is simpler. How can it be more confusing? You have to shift the levers in the right sequence. You can't shift the rear into nuetral until the front is in nuetral first. You can't shift the front into gear until the rear is in that range first. Same logic as stock. That is until you play with the rods and pills
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Maybe the only other possible disadvantage beside the confusion is you see a lot of guys with twin sticks that need bungy cords to hold them in gear. Of course thats fixable just seems to be a common issue.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Maybe the only other possible disadvantage beside the confusion is you see a lot of guys with twin sticks that need bungy cords to hold them in gear. Of course thats fixable just seems to be a common issue.

That's because of a problem with the tcase not the shifter.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
I understand that and never said it did. just see many do the conversion then have to run bungy cords to keep them in gear. Sometimes theres more to the conversion than people let on or actually do.
 

matts460

Sr. Member
Joined
Feb 3, 2013
Messages
583
Well i was considering doing the twin stick conversion but... my J shifter is working just fine and is no problem at all to shift from high/low or low/high or back and forth from 2/4 when out playing. I understand the pros to the conversion but sofar havent really needed it. I figure the best pro is 2low in rear but jee if i really want that i can just not lock in the hubs i guess. Oh ya plus chicks dig guys with twin sticks HEHE right? lol
 

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I was perfectly happy with the stock "J" shifter but had to do the twin stick when I did the NV3550 mod. I actually like the way twin sticks link to the shift rails on the "T" more than the "J" transfer case. The "T" actually has little heim joints where the "J" shifter slides in slots.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
For me the advantage of the twin sticks was I can actually get the damn T-case in and out of gear. I fought that stupid wobbly J-shifter for years. I couldn't wait to install twin sticks and off road more because of them.
 

markperry

Bronco Guru
Joined
May 8, 2009
Messages
4,175
The advantage for me was when my CV joint/rear driveshaft shot craps. I just locked the hubs and drove for a week on the fronts until my new driveshaft came in.
 
Top