Bronco's at paint. Paint guy did a great job with the doors. Gaps are all very nice, alignment is good, body line is good, etc
only issue is drivers side windshield frame to door window frame gap is huge. Passenger side is not. We suspect the replacement drivers side A-pillar was installed improperly causing the window frame to be further away than it should be.
Its kind of to late to reverse course and tear all of that apart so we are considering moving the window frame forward on the door a fraction of an inch to shrink that gap. I'm going to run a soft top so the fraction of an inch should be cheatable on the back side of the window frame.
Has anyone ever done this?
Here's a couple pictures. The windshiield frame bolts are not in so it would pinch down some

only issue is drivers side windshield frame to door window frame gap is huge. Passenger side is not. We suspect the replacement drivers side A-pillar was installed improperly causing the window frame to be further away than it should be.
Its kind of to late to reverse course and tear all of that apart so we are considering moving the window frame forward on the door a fraction of an inch to shrink that gap. I'm going to run a soft top so the fraction of an inch should be cheatable on the back side of the window frame.
Has anyone ever done this?
Here's a couple pictures. The windshiield frame bolts are not in so it would pinch down some












