Without looking I think there are 3 -20 amp fuses and 1 -15 amp fuse... I think I ran an 8 gauge to the stud, but I have a fog light circuit on that stud too.
Community
Buy / Sell
Bronco Tech
Fuel Tank Access Plate
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
Wiring help needed
- Thread starter fummins97
- Start date
Without looking I think there are 3 -20 amp fuses and 1 -15 amp fuse... I think I ran an 8 gauge to the stud, but I have a fog light circuit on that stud too.
OP
OP
fummins97
Full Member
Thanks guys, ran that wire and everything seems to be working. Taking it into the muffler shop next week, then I'll attempt to start it. Thank you
