- Joined
- Jun 4, 2002
- Messages
- 37,111
OK, so we get a new big super fancy Miller TIG welder here at work. I am not even sure what model it is, but make is Miller. I have never TIG'd in my life. Gas welding, at least 12 years. Stick, at least 15. That is not years been doing it, that is years since I tried. MIG I own and am fairly good at.
So I get the 30 second demo. Don't touch the tip. the harder you mash the pedal the hotter it will go. Welds kinda like gas. Fire it up, play with the arc a little, pick up some rod and start having fun. I find myself welding everything, and doing a fairly good job at it as well. By no means an expert, but doing fairly good. Having that pedal on the floor to control the weld, oh so nice. On and off, keeping the weld going, putting heat when and where you want. TIG is amazing.
So now I am thinking of a TIG to add to the garage. I am in the early steps of shopping, not real defined at the moment. Quick check shows MSRP starting at just over $1000, several around $3000, and the upper end of what I could consider home use around $6000.
I am NOT looking to weld nuclear reactors, but I do want AC to do aluminum. The wall power limit is a 220V 50A outlet. This will be a home unit.
My quickie shopping lead my toward a Miller Dyansty 200 SD (the base version of the two shown) http://www.millerwelds.com/products/tig/dynasty_200_series/
So, I am open to thoughts of those running with TIGs. What did you get, why, what do you like, what do you not like, what do you wish you had instead, what was a waste of money, what feature can you not live without, what feature is useless, etc.
So I get the 30 second demo. Don't touch the tip. the harder you mash the pedal the hotter it will go. Welds kinda like gas. Fire it up, play with the arc a little, pick up some rod and start having fun. I find myself welding everything, and doing a fairly good job at it as well. By no means an expert, but doing fairly good. Having that pedal on the floor to control the weld, oh so nice. On and off, keeping the weld going, putting heat when and where you want. TIG is amazing.
So now I am thinking of a TIG to add to the garage. I am in the early steps of shopping, not real defined at the moment. Quick check shows MSRP starting at just over $1000, several around $3000, and the upper end of what I could consider home use around $6000.
I am NOT looking to weld nuclear reactors, but I do want AC to do aluminum. The wall power limit is a 220V 50A outlet. This will be a home unit.
My quickie shopping lead my toward a Miller Dyansty 200 SD (the base version of the two shown) http://www.millerwelds.com/products/tig/dynasty_200_series/
So, I am open to thoughts of those running with TIGs. What did you get, why, what do you like, what do you not like, what do you wish you had instead, what was a waste of money, what feature can you not live without, what feature is useless, etc.











