• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Important 1977 Bronco facts

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
That depends entirely on what the base MSRP for a 77 was compared to a 76.

It doesn't necessarily cost more if you start at a lower base price and add from there.

There's no difference between a $4100 Bronco with a "free" seat or a $4000 one with a $100 optional seat.


And it's all listed in that brochure that is "maybe" right and it's on the window sticker so buyers knew what they were paying for.

Few people want to buy a vehicle with no passenger seat. Even fewer want to know that it cost them $95 dollars just to get it as a option when it should have been standard. Most people realize what they are paying for when they buy a vehicle. Again it seems to be more of a way to make more money off the buyers than actual option in the case of a passenger seat. If it was so important to let people know what they were paying for then why didnt they list the drivers seat, steering wheel, windshield ect.

Basic list price for a 76 V8 equipped bronco was $5078 base list price on a 77 was listed as $5260 go back a few years and a 73 base model with a 6 cyl supposedly went for $2937 My 73 with Ranger package was $5090
but thats neither here nor there you cant really compare base prices between years. There are to many other factors involved
 
OP
OP
Old School

Old School

Sr. Member
Joined
Jun 22, 2011
Messages
440
Loc.
AZ
Bright Molding-rocker panel (N.A. with Ranger unless tape stripe is deleted)


GVWR package 4400# says "Standard GVWR with drivers seat only. Rear Seat not available."
The 4600# package says "Requires rear bench seat and RH front seat."
 

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,151
All nice info guys. Anyone know if the 4.11 gears were put in as an option or how much extra it cost in '77? I know most had 3.50's.

Blue71
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Pretty sure you could still option it with 4.11's in '77
I think the 4.56's that were available earlier, were no longer available though.
Someone will know for sure though. I'm just piping up for the fun of it. ;D

Paul
 
OP
OP
Old School

Old School

Sr. Member
Joined
Jun 22, 2011
Messages
440
Loc.
AZ
According to the brochure, the only front axle was a 3:54
The rear was a 3:50 with a 3:50 Traction Loc optional.

I have 2 77's and both have 3:50's.
My 76 has factory 4:11's so that might be the last year.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
All nice info guys. Anyone know if the 4.11 gears were put in as an option or how much extra it cost in '77? I know most had 3.50's.

Blue71

Brochures in '76 say the 4.09/4.11s were available, '77 lists 3.50s only with Traction-Lok as an option.

Todd Z.
 

bobzilla

Full Member
Joined
Nov 22, 2006
Messages
298
Loc.
Riverside, ca
As far as what's in the sales brochure and what is actually available is still notalwsays correct. When I bought my 2004 f150 brand new the sales brochure showed that you could get the supercrew with the 6 or 8 foot bed. You can get them that way now but it took a year or two for themto become available. So just a heads up, 30 years from now some kid Is gonna get that brochure and scour the junk yards and eBay searching for the mythical 04 long bed crew cab
 
OP
OP
Old School

Old School

Sr. Member
Joined
Jun 22, 2011
Messages
440
Loc.
AZ
As far as what's in the sales brochure and what is actually available is still notalwsays correct. When I bought my 2004 f150 brand new the sales brochure showed that you could get the supercrew with the 6 or 8 foot bed. You can get them that way now but it took a year or two for themto become available. So just a heads up, 30 years from now some kid Is gonna get that brochure and scour the junk yards and eBay searching for the mythical 04 long bed crew cab


True, but everything in the Bronco brochure has proven to be right so far.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Well its proven right to a couple of known 77 broncos doesnt mean it applies to all 77's you know how the factory is. plus 77 was a hit or miss year as it was especailly with trim pieces and different packages. I've seen 77 rangers/sports with stripes only some with trim some without all kinds of different commbos that didnt follow what the brochure said.. they really had no set standard that year due to availibility of parts at leas thats what I've read about the last year of the EB and why some of them didnt come with all the options of the package they were supposed to have.
 

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,151
To follow up, my '77 Ranger came stock with the 4.11's and traction lock. Havent seen many other '77's with the 4.11's in them from the factory. My Ford Build type sheet states 4.11's and also my VIN tag. Kinda neat. Thanks,

Blue71
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
To follow up, my '77 Ranger came stock with the 4.11's and traction lock. Havent seen many other '77's with the 4.11's in them from the factory. My Ford Build type sheet states 4.11's and also my VIN tag. Kinda neat. Thanks,

Blue71

I'm not at all surprised. Many of us (you included) have seen things on '77s that were allegedly not available per the factory documentation. Back in the pre-internet days, I recall some printed discussions mentioning a few original owners having 31 spline axles in their '77s. I'm not surprised by that either.

Todd Z.
 

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,151
Todd, Thanks for the info. Would be cool to see if anyone posts up about having the 31 spline axles. Heck..ya never know:)

Blue71

I'm not at all surprised. Many of us (you included) have seen things on '77s that were allegedly not available per the factory documentation. Back in the pre-internet days, I recall some printed discussions mentioning a few original owners having 31 spline axles in their '77s. I'm not surprised by that either.

Todd Z.
 

sellitall

Bronco Guru
Joined
Jul 30, 2002
Messages
1,444
Loc.
Malvern, Pennsylva
My 77 had no rear seat. You could see the stamp marks in the floor where the seat would be drilled and installed from the factory. It was also a sport model which I found weird.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
rear seats were only standard in Ranger models and maybe explorers. but in all other models it had to be ordered.
 

Stroppe-Envy-77

Bronco Guru
Joined
Jun 15, 2009
Messages
1,011
As far as what's in the sales brochure and what is actually available is still not alwsays correct.

Very possible.

Keep in mind, the brochures for the 1977 model year were dated August 1976 (I have one). Given the lack of computer technology at the time, that means that Ford's printing shop would have had to have the text and photos in hand by July, or maybe earlier.

(I have also have an original brochure for my '68 Mustang, printed in August 1967. Stapled inside the back cover is a page of revisions, printed in December '67. It seems there were a bunch of changes made part way through the model year, and Ford deemed it easier to just add a supplement rather than try to reprint new brochures, not to mention round up all the earlier ones.)

Obviously a long time elapses between brochure printing and the second half of vehicle production for the model year. Specs and equipment can change, especially given that after MY 1977, the entire Bronco would change with only a handful of parts carrying over. Throw in customer and dealer requests for different specs on things, and it's easy to see how there could be discrepancy between what was printed and what ended up on the vehicles.
 

willtel

Sr. Member
Joined
Oct 3, 2003
Messages
598
There is an article in this months Off Road Adventures magazine about '77s and it mentions several times that the passenger seat was optional.

Mine had front and rear seats but the back seat had a plaid insert while the front seats had black inserts. I always assumed the rear seat was recovered or added later but then I saw another orange '77 for sale on Craigslist with the exact same seats. Who knows how they ended up like that?


Original seats by willtel, on Flickr

I think mine also has 4:11 gears and traction-loks front and rear. Does anyone know how to decode the axle tags so I can verify?
 
OP
OP
Old School

Old School

Sr. Member
Joined
Jun 22, 2011
Messages
440
Loc.
AZ
I think mine also has 4:11 gears and traction-loks front and rear. Does anyone know how to decode the axle tags so I can verify?

Check the data tag on the glove box door.

What does it say under "axle"?
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I don't have the original tag but the Marti report shows AJ3.

AJ3? That is not a valid rear or front code. A3J is rear track-lock and 4.11 2900 lb axle and with power steering in front. No front limited slip.
 
Top