• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

31 spline axle question?

markperry

Bronco Guru
Joined
May 8, 2009
Messages
4,175
I recently purchased new 31 spline axles for a 11' big bearing 9' rear. The problem is when I went to bolt in the axles the axle bearing retainer plate was to small. It was about a 1/2 inch too small, so I'm assuming they sent the wrong plate with my order.

I was woundering if any of the usual parts stores would carey anything I can use?
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Probably sent the wrong plates.
 

Attachments

  • ford%209%20inch%20axle%20ends.JPG
    ford%209%20inch%20axle%20ends.JPG
    43.2 KB · Views: 81

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I don't know of any local sources. You could re-use the old ones but they're a lot thinner than the aftermarket plates.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
A speed shop or well-stocked auto parts store with an owner that's a gear head might have some.
I don't know if most cars would have used the small bearing retainers, but I've seen at least one size of 9" retainer on the shelf at my local Speed Shops over the years.

Maybe a differential specialty shop?

Paul
 
OP
OP
markperry

markperry

Bronco Guru
Joined
May 8, 2009
Messages
4,175
Thanks for your help guy's maybe I should be patient and wait for the vendor to send the correct ones, but I need the Bronco back on the road soon, it's my daily driver.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Nothing like needing something in a hurry over a holiday weekend, eh?
And with potentially holiday/weather delays in shipping, you're just having a great time I bet, deciding whether to wait, or just put your old stuff back in while you wait for the right parts!

Was that one of our sets Mark? If so, send an e-mail, or better yet, an internet order, for the right parts. If you put copius notes in the body of the order, telling us what doofus' we are, we'll straighten out any costs before your card gets charged and get the right parts on their way as fast as possible.

I'm saying that because, if this Monday follows past Thanksgiving Mondays, between having several days off, a Black Friday sale, and the usual Monday madness as well, I just want to make sure you get handled early and don't have to wait on the phone if we're busy.

If it wasn't us, cancel that.... ;D

Paul
 

dieselbronco

Full Member
Joined
Jan 18, 2009
Messages
151
Loc.
Tolland CT
I would bet that even if your local store can get them they will have to order them anyway. Probably better off just calling the supplier where you got them right away and have them over night them.
 
OP
OP
markperry

markperry

Bronco Guru
Joined
May 8, 2009
Messages
4,175
Nothing like needing something in a hurry over a holiday weekend, eh?
And with potentially holiday/weather delays in shipping, you're just having a great time I bet, deciding whether to wait, or just put your old stuff back in while you wait for the right parts!

Was that one of our sets Mark? If so, send an e-mail, or better yet, an internet order, for the right parts. If you put copius notes in the body of the order, telling us what doofus' we are, we'll straighten out any costs before your card gets charged and get the right parts on their way as fast as possible.

I'm saying that because, if this Monday follows past Thanksgiving Mondays, between having several days off, a Black Friday sale, and the usual Monday madness as well, I just want to make sure you get handled early and don't have to wait on the phone if we're busy.

If it wasn't us, cancel that.... ;D

Paul

Thanks Paul but it wasn't you guy's!
 
OP
OP
markperry

markperry

Bronco Guru
Joined
May 8, 2009
Messages
4,175
I would bet that even if your local store can get them they will have to order them anyway. Probably better off just calling the supplier where you got them right away and have them over night them.

Yeah, I'm gonna call them in the morning. Thank's guy's!
 
OP
OP
markperry

markperry

Bronco Guru
Joined
May 8, 2009
Messages
4,175
I found a local speed shop that had the bearing retainer plate...all is good and up and running!
 
Top