Burkulater
Full Member
Yep chrome ones she looks sharp. I think the bumperets would look really nice on there yet
respirator with old filters. I figured the filter life was time used, not time open. Guess I'll pick up some more filters.
Welcome to the threadany photos of yours?
1966,351w,m5od,205....3.5" lift, 2" body, 37/13/15 boggers
I don't mean to brag, but I had a huge day in the garage today, just check out this before and after photo. ;D
![]()
![]()
Seriously though, huge shout-out to Wildhorses and Dirtdonk (Paul) who helped me troubleshoot my brake problem. I installed a new master cylinder and rear brake line and had trouble bleeding the system. Ended up sorting out a problem with the stock proportioning valve, but still had way too much pedal travel. All searching online led me to believe there was still air in the system. Called Paul and he told me to check the pushrod adjustment. Ended up that the aftermarket MC required the pushrod to be pulled out 1/4" past factory spec. Would have never thought to check that, so many thanks to Paul. After adjusting it out, am very near the end of the screw travel (3 or 4 threads) so added a jam nut as a temporary fix.
Moral of the story... check the new MC piston depth and adjust rod as needed. Or do it my way and spent 4 or 5 hours and 2 quarts of brake fluid bleeding and rebleeding and scratching head and cursing first
![]()
![]()
Paul also informed me that WH sells this deluxe master cylinder which has adjustable piston depth and a much more secure cap than the standard replacements. The leaking MC cap/lid is a very common problem, so for a few bucks more I would've gone with this one had I known about it.
Installed a new drive-shaft and 3* pinion shims....3* was not enough, so I had to order 6* shims!






