Tedster100
Chairman of the Bored
- Joined
- Aug 25, 2010
- Messages
- 1,762
I cracked a u-joint at the rear diff a while back and now I'm going thru them like candy - maybe 20 miles & they're done. After talking with Tom Wood (excellent guy by the way!) he said it sounds like the wrong size cap causin mid-alignment. Upon closer inspection I found that one of the keeper tabs that is on the pinion yoke is broken out and is allowing the u-joint to slide to one side in the straps causing failure.
I have another yoke from a spare 9" but I'm thinking I'll need to have the pinion re-set if I loosen the yoke but & re-install. Is this the case or can I just swap them?
I have another yoke from a spare 9" but I'm thinking I'll need to have the pinion re-set if I loosen the yoke but & re-install. Is this the case or can I just swap them?











