• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Test Running Engine Help

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
I'm ready to start my new engine up. It' on the frame without the body or any wiring. It has a MSD ignition box and distributor. I'm running a Serp belt around the alt, A/C, water pump, and crank. I was just going to hook a battery up to a starter solenoid and to the block, run a cable from the solenoid to the starter, run the ignition box to the battery +/-, and a line from the solenoid to the ignition box. no ignition keys, just going to use test button. Do I need to tie the alt into anything or can I run it without any wires coming out of it? Am I forgetting something that will burn out the ignition box or dizzy?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Leave all the wires off the alt and it will be fine. It will be a "total loss" ignition system, that is as it runs the battery is draining. Hook up a battery charger to cover the loss, not that it will run long enough to be an issue. But you will want to keep the battery charged while in storage.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
Please tell me you have a radiator with fluid in it? Don't need the fan, but need the water moving.
 
OP
OP
AZ73

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Please tell me you have a radiator with fluid in it? Don't need the fan, but need the water moving.

Yes, but thanks! and I tied the heater hose from the pump to the intake together. More worried about burning out the expensive ignition set-up.
 
Top