• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Nv3550

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
Passing on what I learned with my gear change 2 years ago.

I went with 4.11 after doing lots of reading. I love them (woke up my rig bigtime) however, if I had to do it over again, I would have tried multiple ratios in the 9 before doing the D44. The 4.11's feel so good, I wonder how 4.30's or ever 4.56's would feel with my 33's (ok there closer to 32's but you get the drift).

My old unknown 16 plus year old 302 handles the RPM increase very very well and got it in the power band for sure. Not saying I would have gone with 4.30's or 4.56's but I sure would like to see how they feel.

Gears for the 9 are cheap (paid 112 shipped for my 4.11's) and you can always sale the ratios you don't go with.

Don't fear the gear

Tim
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Passing on what I learned with my gear change 2 years ago.

I went with 4.11 after doing lots of reading. I love them (woke up my rig bigtime) however, if I had to do it over again, I would have tried multiple ratios in the 9 before doing the D44. The 4.11's feel so good, I wonder how 4.30's or ever 4.56's would feel with my 33's (ok there closer to 32's but you get the drift).

My old unknown 16 plus year old 302 handles the RPM increase very very well and got it in the power band for sure. Not saying I would have gone with 4.30's or 4.56's but I sure would like to see how they feel.

Gears for the 9 are cheap (paid 112 shipped for my 4.11's) and you can always sale the ratios you don't go with.

Don't fear the gear

Tim

Were those 4.11 gears used with or without an overdrive?
I remember how nice 4.11 gears were on 33s withOUT overdrive. I would take the freeway a couple hundred miles up into the mountains and take hard trails all with that combo. When I went overdrive I dropped to 4.88 gears with the same tire.
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
Were those 4.11 gears used with or without an overdrive?
I remember how nice 4.11 gears were on 33s withOUT overdrive. I would take the freeway a couple hundred miles up into the mountains and take hard trails all with that combo. When I went overdrive I dropped to 4.88 gears with the same tire.

Factory 3 speed for now. I plan to go with an NV3550 down the road at some point (funds holding me back right now).

I am worried I went just a bit high for the OD but hope to not use it that much as I'm not on the highways that often and when I am it's short trips. I really don't want to do the D44 again just because it's such a pain to setup. Not hard just a pain.

I feared the gear which is why I went 4.11. Now that my eyes are open, 4.30's or 4.56 no longer scare me.

Tim
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
It's strange to think I could call 4.88 gears good highway gears, even with little 33s. But with an overdrive they really were good on the highway.
 

bearskinner

Full Member
Joined
Feb 22, 2011
Messages
292
Loc.
N.Idaho, AK, SoCal
I am running the NV3550, with 4.56's and a true 35" tire. It gives me a very usable first, and 2500 rpm at 75 cruising on the freeway. At 65 mph, its around 2100. I wanted to be able to drive it on the freeway, but have a good low range too. I too did a lot of looking and reading. I LOVE this gear setup, it works perfect for me, that being said, figure out what will work perfect for you. If you think you MAY EVER go to larger tires, do the gear swap to a lower gear ONE TIME, now. its easier to cruise at 5 mph slower, than have to change the gears again later.
 

kntr

Bronco Guru
Joined
Oct 7, 2006
Messages
2,277
I am running the NV3550, with 4.56's and a true 35" tire. It gives me a very usable first, and 2500 rpm at 75 cruising on the freeway. At 65 mph, its around 2100. I wanted to be able to drive it on the freeway, but have a good low range too. I too did a lot of looking and reading. I LOVE this gear setup, it works perfect for me, that being said, figure out what will work perfect for you. If you think you MAY EVER go to larger tires, do the gear swap to a lower gear ONE TIME, now. its easier to cruise at 5 mph slower, than have to change the gears again later.

Thanks so much. This is exactly what I was looking for.
 
Top